>Finally, check that no water has entered the sills. Poor fibreglass lay-up by >QSC at the front of the sill in front of the 'A' pillar led to me having to >replace the metal sill - it had rotted away to nothing near the seat belt >attachment! >(https://quantumforum.proboards.com/thread/522/quantum-saloon-full-rebuild?page=2)
This sounds like a possible (and alarming) explanation for the brown patch under the gelcoat on my 2+2 below the door hinges in the sill. I've asked for a logon for the proboards to look at your link. Matthew -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/quantumowners/00c101d72255%247f6fd900%247e4f8b00%24%40yahoo.com.
