The Ford part is Finis code 6152276
It's a 8mm x 40mm Torx head
But you can use a normal HT bolt in there with a hex or allen head , one
marked 10.9 or 12.9 would be best, they are stronger than the default 8.8
spec.
Black allen headed bolts tend to be 10.9 as a minimum.
Ideally find a bolt that has a long enough unthread section to pass through
one side of the hub and the slot in the balljoint, but obviously not to much
unthreaded so the nut bottoms out.
Jim
From: list...@liberator-systems.co.uk
Sent: Monday, September 11, 2023 1:31 PM
To: Quantum Owners Group
Subject: [Quantum Owners] Pinch Bolt - Front track control arm - Saloon Mk2
What are the correct pinch bolts for the front track control arm ball joint?
Mk2 saloon - Fiesta Mk2 XR2 base, Escort Mk4 control arms & anti roll bar.
Thanks
John
--
--
You received this message because you are subscribed to the Google Groups
"Quantum Owners Group" group.
To post to this group, send email to quantumowners@googlegroups.com
To unsubscribe from this group, send email to
quantumowners-unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/quantumowners?hl=en
IMPORTANT NOTE: All information presented herewith is provided on an "As Is"
basis, without warranty or the implication thereof. Neither the Quantum
Owners Club nor the individuals associated with the Quantum Owners Club or
in the preparation of the above information shall have any liability to any
person or entity with respect to liability, loss, or damage caused or
alleged to be caused directly or indirectly by the instructions contained
within this or related message(s).
---
You received this message because you are subscribed to the Google Groups
"Quantum Owners Group" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to quantumowners+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/quantumowners/e0732f27-6b8a-421b-ac91-a34e83629ba0n%40googlegroups.com.
--
--
You received this message because you are subscribed to the Google Groups "Quantum
Owners Group" group.
To post to this group, send email to quantumowners@googlegroups.com
To unsubscribe from this group, send email to
quantumowners-unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/quantumowners?hl=en
IMPORTANT NOTE: All information presented herewith is provided on an "As Is"
basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor
the individuals associated with the Quantum Owners Club or in the preparation of the
above information shall have any liability to any person or entity with respect to
liability, loss, or damage caused or alleged to be caused directly or indirectly by the
instructions contained within this or related message(s).
---
You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to quantumowners+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/quantumowners/FF60D929E4C54BD78A5FC0F20F3C5409%40JimQuad.
