Thanks Jim.
For some reason I had in back of my mind that they were special ground 
tapered bolts ;-)
John


On Monday, 11 September 2023 at 14:12:36 UTC+1 Jim Hearne wrote:

> The Ford part is Finis code 6152276
> It's a 8mm x 40mm Torx head
>
> But you can use a normal HT bolt in there with a hex or allen head , one 
> marked 10.9 or 12.9 would be best, they are stronger than the default 8.8 
> spec.
> Black allen headed bolts tend to be 10.9 as a minimum.
> Ideally find a bolt that has a long enough unthread section to pass 
> through 
> one side of the hub and the slot in the balljoint, but obviously not to 
> much 
> unthreaded so the nut bottoms out.
>
> Jim
>
>
>
> From: list...@liberator-systems.co.uk
> Sent: Monday, September 11, 2023 1:31 PM
> To: Quantum Owners Group
> Subject: [Quantum Owners] Pinch Bolt - Front track control arm - Saloon Mk2
>
> What are the correct pinch bolts for the front track control arm ball 
> joint?
> Mk2 saloon - Fiesta Mk2 XR2 base, Escort Mk4 control arms & anti roll bar.
> Thanks
> John
>
> -- 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Quantum Owners Group" group.
> To post to this group, send email to quantu...@googlegroups.com
> To unsubscribe from this group, send email to 
> quantumowner...@googlegroups.com
> For more options, visit this group at 
> http://groups.google.com/group/quantumowners?hl=en
>
> IMPORTANT NOTE: All information presented herewith is provided on an "As 
> Is" 
> basis, without warranty or the implication thereof. Neither the Quantum 
> Owners Club nor the individuals associated with the Quantum Owners Club or 
> in the preparation of the above information shall have any liability to 
> any 
> person or entity with respect to liability, loss, or damage caused or 
> alleged to be caused directly or indirectly by the instructions contained 
> within this or related message(s).
> --- 
> You received this message because you are subscribed to the Google Groups 
> "Quantum Owners Group" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to quantumowner...@googlegroups.com.
> To view this discussion on the web visit 
>
> https://groups.google.com/d/msgid/quantumowners/e0732f27-6b8a-421b-ac91-a34e83629ba0n%40googlegroups.com.
>  
>
>
>

-- 
-- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To post to this group, send email to quantumowners@googlegroups.com
To unsubscribe from this group, send email to 
quantumowners-unsubscr...@googlegroups.com
For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
basis, without warranty or the implication thereof. Neither the Quantum Owners 
Club nor the individuals associated with the Quantum Owners Club or in the 
preparation of the above information shall have any liability to any person or 
entity with respect to liability, loss, or damage caused or alleged to be 
caused directly or indirectly by the instructions contained within this or 
related message(s).
--- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to quantumowners+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/quantumowners/eac497aa-a765-4cbf-93a2-a3bd0892375cn%40googlegroups.com.

Reply via email to