On Thursday, September 29, 2016 at 11:06:43 AM UTC-4, raah...@gmail.com wrote: > ah yes xlinfo, i learned of this command when trying to find a way to show > how much memory the system recognizes installed. > > Its still confusing to me to figure exactly how much ram i have available to > use for vms. or if all memory is being given back when shutting things down. > > In 3.0 all memory was loaded by dom0. So I would just watch the > qubes-manager and make sure missing memory from dom0 matched up to total of > the vms. But since 3.1 though dom0 is limited to 4gb so accounting for all > the memory manually that way is not possible anymore. > > I figure I need at least 1700mbs for dom0 before things start crashing and I > just consider my available memory w/e is extra in dom0.
this because I don't have alot of ram and never have more then 4 available anyways. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/4c260ba6-ac4d-4f18-ac7f-8999e3f9ed6c%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.