Hi all, I've been struggling to install Qubes on a 2015 Macbook Pro, and I seem to be having a problem similar to others: my Xen.cfg file is empty after the initial Qubes installation. This obviously leaves me with an un-bootable system.
I've done quite a bit of poking around, and I stumbled on a github thread (https://github.com/QubesOS/qubes-issues/issues/794) which has information about what should be in a normal config file. I've hand-modified the file, and have gotten up to a point where the bootloader starts to look for the root device and fails. My question is, how do I figure out the location of the root device? I've tried running vgdisplay and lvdisplay when in lvm (from the dracut command prompt), but it doesn't come up with anything. Can anyone please point me in the right direction? I apologize if this has been covered before, but I've done hours of research, and have been unable to come up with an answer. regards, deadseeds -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to firstname.lastname@example.org. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/a22520e8-fd82-4dd4-adfa-309eca4c5b3e%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.