I thought it would be a less cumbersome way to do it than attaching a device, and then manually running two commands to attach, and also two to detach the device. Every single time I use any device. That is less than ideal, that is why I thought I might be able to assign one USB controller to each of my qubes, so I can use USB devices with less hassle, yet still isolate them to specific qubes. Can I consider a USB hub a 'device'?
W dniu środa, 18 stycznia 2017 16:13:11 UTC+1 użytkownik podmo napisał: > [email protected] wrote: > > What about PCIe USB cards? Could I assign such pcie device to specific > > cube, so USB ports on that card are available only for that qube, as there > > is another controller on the card(I think so at least), or is my reasoning > > wrong? > > Keep in mind you can passthrough a single USB device to a qube by > following the steps at the bottom of https://www.qubes-os.org/doc/usb so > you don't really need to use all these separate USB controllers, but the > method you are describing would work too. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/bb5fa61a-9552-434c-8134-11345273d21c%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
