在 2018年3月16日星期五 UTC+8上午10:19:41,Greg写道: > Hi, > > Please assist if possible - I'm trying to get the Broadcom WLAN adapter > BCM43602 working on my Macbook Pro under Qubes OS 4.0 rc5. > > "03:00.0 Network controller: Broadcom Limited BCM43602 802.11ac Wireless LAN > SoC (rev 01)" > > I've managed to install Qubes OS successfully (during the second part of > setup, just before sys-net creation I switched to a console and started a > short bash script that just loops over and over trying to remove the BCM43602 > from sys-net, then I went back and completed the setup. The script > successfully removed the BCM43602 from sys-net before sys-net was started by > the setup wizard, meaning that I managed to avoid the system freeze that > would have otherwise occurred during setup). > > Now I'm trying to actually get the BCM43602 working, i.e. attach the adapter > to a qube (e.g. sys-net, standalone hvm or anything at all without freezing). > However it seems that the system freezes the moment I start the qube it is > attached to and it doesn't matter which kernel the associated qube is > actually running (e.g. it freezes even when I attach it to a qube that is a > fresh Ubuntu 17.10 install with hvm and no kernel seleced). I've tried > different combinations of permissive mode and no-strict-reset and pv/hvm but > every combination results in freezing. > > I'm not sure how to proceed? Does anyone have the BCM43602 working under 4.0 > rc5? > > Any pointers would be appreciated. > > Thanks, > Greg
Hi, hopes I'm not bothering you and thanks for your tips I finally got Qubes running on my MBP. However, I can't get the wifi card working using methods you discussed above, after running "sudo xl pci-attach sys-net '02:00.0,permissive=1'" (02:00.0 is the network controller pci address), sys-net still don't have the network controller attached and using "qvm-pci attach" still cause the system to freeze, how do you finish the attach phase? -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/53b32c81-9edf-468d-80ec-247e332094e7%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.