On Friday, August 24, 2018 at 8:31:07 AM UTC-4, awokd wrote: > On Fri, August 24, 2018 12:03 pm, Daniil .Travnikov wrote: > > On Friday, August 24, 2018 at 6:08:54 AM UTC-4, awokd wrote: > > > >> On Fri, August 24, 2018 9:53 am, Daniil .Travnikov wrote: > >> > >>> I have an LTE USB Modem which I used in Qubes 3.2 very well, but in > >>> Qubes > >>> 4.0 I have some issues. > >>> > >>> > >>> > >>> > >>> First of all in Qubes Manager I can attach this usb modem only in HVM > >>> mode ('ERROR: devices tab: Can't attach PCI device to VM in pvh > >>> mode'). > >>> > >>> > >>> So I changed in VM on HVM mode and attached just usb slot. > >>> > >>> > >>> > >>> > >>> > >>> Then I tried to turn on my VM but I got 2 same error messages (first > >>> one in windows and the second one on the top right corner): > >>> > >>> 'ERROR: Start failed: internal error: Non-endpoint PCI devices cannot > >>> be assigned to guests, see /var/lob/libvirt/libxl/libxl-driver.log' > >>> > >>> 'Qube Status: usb > >>> Domain usb has failed to start: Internal error: Non-endpoint PCI > >>> devices cannot be assigned to guests'. > >>> > >>> > >>> Tell me please what am I missing in Qubes 4.0? > >>> > >> > >> Do an "lspci" and "lspci -t" in dom0, and try attaching the leaf device > >> instead. Sounds like you are trying to attach some type of bridge. > > > > Thank you for your answer. > > > > > > > > Before your message I tried to attach this device: > > '00:1d.0 PCI bridge: Intel Corporation Device a330 (rev f0)' > > and you saw which error I got. > > > > After your message I thought maybe I am choosing not correct device and > > now I am choosing this device: '00:14.0 USB controller: Intel Corporation > > Device a36d (rev 10)' > > Yes, this one should work better. > > > and got another error messages: > > > > 'ERROR: Start failed: internal error: Unable to reset PCI device > > 0000:00:14.0: no FLR, PM reset or bus reset available, see > > /var/log/libvirt/libxl/libxl-driver.log for details' > > > > > > 'Qube Status: usb > > Domain usb has failed to start: internal error: Unable to reset PCI device > > 0000:00:14.0: no FLR, PM reset or bus reset available'. > > Disable the strict reset requirement on that device, either in the GUI or > CLI.
Thank you very much again. It works for me. When I am choosing this device: '00:14.0 USB controller: Intel Corporation Device a36d (rev 10)' and start VM, I see that all usb controllers going to work from this started new VM. Like you already saw in the list of pci above I have only 1 USB controller in the list (when I run the command 'lspci'). But in my laptop I have 3× USB 3.1 Type-A and they all going to started with VM. Maybe existing some way, when I can connect only those usb ports which has include devices at the time? -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/d0fde295-5c44-45e7-809b-a0da2913fe37%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.