On Saturday, August 25, 2018 at 10:59:22 AM UTC-4, awokd wrote: > On Sat, August 25, 2018 2:45 pm, Daniil .Travnikov wrote: > > On Saturday, August 25, 2018 at 10:20:02 AM UTC-4, awokd wrote: > > > >> On Fri, August 24, 2018 2:23 pm, Daniil .Travnikov wrote: > >> > >> > >>> When I am choosing this device: > >>> '00:14.0 USB controller: Intel Corporation Device a36d (rev 10)' > >>> > >>> > >>> > >>> and start VM, I see that all usb controllers going to work from this > >>> started new VM. > >>> > >>> > >>> Like you already saw in the list of pci above I have only 1 USB > >>> controller in the list (when I run the command 'lspci'). But in my > >>> laptop I have 3× USB 3.1 Type-A and they all going to started with VM. > >>> > >> > >> Missed seeing that, actually! > >> > >> > >>> Maybe existing some way, when I can connect only those usb ports > >>> which has include devices at the time? > >> > >> Can you leave the USB controller in sys-usb, then use qvm-usb to attach > >> just the modem to sys-net? Not sure that would actually work. Is that > >> what you did in 3.2? > > > > Actually when I used Qubes 3.2 it was been the server which was have the > > several usb controllers. And I assume that my laptop have only 1 > > controller which connected to 5 usb ports. Maybe that's why I see only > > one usb controller in Devices tab. > > > > > > When I put in my any usb flash card I can see it when I write command > > 'qvm-block', but when i put in my usb modem this command do not show my > > device. > > > > I checked modem, he is still working on another laptop. > > > > > > When I write this commands now: > > 'qvm-block' > > 'qvm-usb' > > > > > > I see empty results: > > 'BACKEND:DEVID DESCRIPTION USED BY' > > OK, then I guess your only option is to do what you were doing and keep > the USB controller in sys-net. This isn't necessarily a bad thing; there's > an option on Qubes install to configure it like that, but it lessens > separation of devices.
Maybe do you know how can I install this Qubes option about you said? Or maybe in some point from docs? -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/3f321979-89eb-491a-8687-bb7c2b55a341%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
