Hi all! It's my first time installing Qubes and I need some help with my network adapters. I am using Qubes 4.0.1 The hardware is Fitlet2 with Intel Celeron J3455 (supports both VT-x and VT-d). It comes with 4 Gigabit Ethernet ports using Intel i211.
Installation was successful but EFI boot entry could not be added. Editing EFI entries using tty2 (Ctrl-Alt-F2) or 'Rescue a Qubes' mode both throw errors. Eventually solved by booting into Live Ubuntu and editing EFI entries from there. Successfully booted into Qubes but couldn't get network working. 1. Physically, port LEDs go off and start blinking after awhile. Keeps repeating. 2. Network icon on top right is red and shows 'loading animation' 3. Network adapter can negotiate speed and duplex but cannot get IP address from DHCP server 4. Changing of network cable and connecting to another switch gives the same results 5. dmesg shows adapter in reset cycle 6. Network adapter works perfect when boot into Live Ubuntu using same hardware dmesg from Qubes [user@sys-net ~]$ sudo dmesg | grep igb [ 4.296718] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 4.296783] igb: Copyright (c) 2007-2014 Intel Corporation. [ 4.7426971 igb 0000:00:06.0: added PHC on eth0 [ 4.742724] igb 0000:00:06.0: Intel(R) Gigabit Ethernet Network Connection [ 4.742758] igb 0000:00:06.0: eth0: (PCIe:2.5Gb/s:Width xl) 00:01:c0:15:66:d2 [ 4.742798] igb 0000:00:06.0: eth0: PBA No: FFFFFF-0FF [ 4.742826] igb 0000:00:06.0: Using MSI interrupts. 1 rx queue(s), 1 tx queue(s) [ 5.034919] igb 0000:00:07.0: added PHC on eth1 [ 5.634921] igb 0000:00:07.0: Intel(R) Gigabit Ethernet Network Connection [ 5.034924] igb 0000:00:07.0: eth1: (PCIe:2.5Gb/s:Width xl) 00:01:c0:15:46:54 [ 5.034927] igb 0000:00:07.0: eth1: PBA No: FFFFFF-0FF [ 5.034929] igb 0000:00:07.0: Using MSI interrupts. 1 rx queue(s), 1 tx queue(s) [ 5.281971] igb 0000:00:08.0: added PHC on eth2 [ 5.281973] igb 0000:00:08.0: Intel(R) Gigabit Ethernet Network Connection [ 5.281976] igb 0000:00:08.0: eth2: (PCIe:2.5Gb/s:Width xl) 00:01:c0:15:46:55 [ 5.281979] igb 0000:00:08.0: eth2: PBA No: FFFFFF-0FF [ 5.281981] igb 0000:00:08.0: Using MSI interrupts. 1 rx queue(s), 1 tx queue(s) [ 5.564667] igb 0000:00:09.0: added PHC on eth3 [ 5.564697] igb 0000:00:09.0: Intel(R) Gigabit Ethernet Network Connection [ 5.564735] igb 0000:00:09.0: eth3: (PCIe:2.5Gb/s:Width xl) 00:01:c0:15:66:d1 [ 5.564780] igb 0000:00:09.0: eth3: PBA No: FFFFFF-0FF [ 5.564810] igb 0000:00:09.0: Using MSI interrupts. 1 rx queue(s), 1 tx queue(s) [ 5.614700] igb 0000:00:08.0: ens8: renamed from eth2 [ 5.639207] igb 0000:00:07.0: ens7: renamed from eth1 [ 5.949373] igb 0000:00:09.0: ens9: renamed from eth3 [ 5.962094] igb 0000:00:06.0: ens6: renamed from eth0 [11.744508] igb 0000:00:06.0: igb: ens6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [13.728120] igb 0000:00:06.0: Reset adapter [17.761975] igb 0000:00:06.0: igb: ens6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [23.007124] NETDEV WATCHDOG: ens6 (igb): transmit queue 0 timed out [23.067303] Modules linked in: ip6table_raw iptable_raw nft_reject_ipv4 nft_reject xen_netback nf_conntrack_ipv6 nf_tables_ipv6 nf_tables_ipv4 nf_tables nfnetlink xt_REDIRECT nf_nat_redirect ip6table_filter ip6_tables xt_conntrack ipt_v4 iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nt_nat_ipv4 nf_conntrack libcrc32c joydev intel_rapl crctl0dif_p ghash_clmulni_intel intel_rapl_perf ttm drm_kms_helper igb ptp pps_core serio_raw drm i2c_algo_bit ehci_pci pcspkr dca i2c_piix4 floppy u2mfn(0) xen_gntdev xen_gntalloc xen_blkback xenfs xen_privcmd xen_evtchn xen_blkfront [23.009259] igb 0000:00:06.0: Reset adapter [27.744442] igb 0000:00:06.0: igb: ens6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX dmesg from Ubuntu ubuntu@ubuntu:~$ sudo dmesg | grep igb [13.454671] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [13.454673] igb: Copyright (c) 2007-2014 Intel Corporation. [13.454862] igb 0000:01:00.0: enabling device (0000 -> 0002) [13.700328] igb 0000:01:00.0: added PHC on eth0 [13.700330] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection [13.700332] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width xl) 00:01:c0:15:46:54 [13.700335] igb 0000:01:00.0: eth0: PBA No: FFFFFF-0FF [13.700337] igb 0000:01:00.0: Using MSI interrupts. 2 rx queue(s), 2 tx queue(s) [13.700418] igb 0000:02:00.0: enabling device (0000 -> 0002) [13.944973] igb 0000:02:00.0: added PHC on eth1 [13.944974] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection [13.944977] igb 0000:02:00.0: eth1: (PCIe:2.5Gb/s:Width xl) 00:01:c0:15:66:d1 [I3.944979] igb 0000:02:00.0: eth1: PBA No: FFFFFF-0FF [13.944981] igb 0000:02:00.0: Using MSI interrupts. 2 rx queue(s), 2 tx queue(s) [13.945065] igb 0000:03:00.0: enabling device (0000 -> 0002) [14.186215] igb 0000:03:00.0: added PHC on eth2 [14.186217] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection [14.186219] igb 0000:03:00.0: eth2: (PCIe:2.5Gb/s:Width xl) 00:01:c0:15:66:d2 [14.186222] igb 0000:03:00.0: eth2: PBA No: FFFFFF-0FF [14.186224] igb 0000:03:00.0: Using MSI interrupts. 2 rx queue(s), 2 tx queue(s) [14.186316] igb 0000:04:00.0: enabling device (0000 -> 0002) [14.427243] igb 0000:04:00.0: added PHC on eth3 [14.427245] igb 0000:04:00.0: Intel(R) Gigabit Ethernet Network Connection [14.427247] igb 0000:04:00.0: eth3: (PCIe:2.5Gb/s:Width xl) 00:01:c0:15:46:55 [14.427249] igb 0000:04:00.0: eth3: PBA No: FFFFFF-0FF [14.427251] igb 0000:04:00.0: Using MSI interrupts. 2 rx queue(s), 2 tx queue(s) [14.428748] igb 0000:02:00.0 enp2s0: renamed from eth1 [14.448177] igb 0000:01:00.0 enp1s0: renamed from eth0 [14.464176] igb 0000:03:00.0 eno1: renamed from eth2 [14.480334] igb 0000:04:00.0 enp4s0: renamed from eth3 [33.272690] igb 0000:03:00.0 eno1: igb: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/c6fe50ed-3fa0-4228-8074-f5ee3ea36203%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
