On 6/26/19 1:33 PM, Chris Laprise wrote:
On 6/26/19 7:56 AM, 'awokd' via qubes-users wrote:
Chris:
Hi all!
Welcome!
Successfully booted into Qubes but couldn't get network working.
1. Physically, port LEDs go off and start blinking after awhile.
Keeps repeating.
2. Network icon on top right is red and shows 'loading animation'
3. Network adapter can negotiate speed and duplex but cannot get IP
address from DHCP server
4. Changing of network cable and connecting to another switch gives
the same results
5. dmesg shows adapter in reset cycle
6. Network adapter works perfect when boot into Live Ubuntu using
same hardware
Quickest thing to try is to switch sys-net's template to Debian. Also,
experiment with
https://www.qubes-os.org/doc/pci-devices/#pci-passthrough-issues
attach options.
Debian can be a good sys-net distro, but unfortunately the template
doesn't have all the wifi drivers pre-installed... I have to manually
install 'firmware-iwlwifi' to get Intel cards working.
I don't think you said which template you are using for sys-net did you?
IMO use Fedora-30 as last I checked using Debian-9 is likely to mess
up your dom0 clock , which matters for updates
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To post to this group, send email to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/qubes-users/59829b75-3f4d-e297-338c-ad4b0f069d8f%40riseup.net.
For more options, visit https://groups.google.com/d/optout.
