Hi Claudia, thanks for your response

aplay -l responds this:
card 0: PCH HDA INTEL PCH device 0 ALC255 analog

the other command does work, but i dont know how to export those from dom 0
and its like 2 pages long, i hope it works without these infos.

If you just want to copy a few lines, select text with the mouse, right click, and choose "copy" (don't use Ctrl-C in terminal), then press Ctrl-Shift-C, switch your browser/email in another VM, and then Ctrl-Shift-V.

For the whole file, run `lspci -k > ~/lspci.txt` then `qvm-copy-to-vm anon-whonix ~/lspci.txt` (replace anon-whonix with the name of the VM you want to copy to). Then it will appear in that VM under /home/user/QubesIncoming/dom0.

gain was already 0

where do i set these model= ?

I will look into kernel upgrades.

That's what I would try first because it's simple to do. `qubes-dom0-update kernel-latest` should be fine. Although, I don't think your card is very new, so a kernel upgrade may not fix anything.

Greez Myros

Also, try modifying your alsa configuration as described here:

For specifying a model:

`sudo nano /etc/modprobe.d/alsa-base.conf`

add a line "options snd_hda_intel " followed by the parameters you want. Save and reboot.

For example,
options snd_hda_intel enable_msi=0 model=dell-spk-noise power_save=0 power_save_controller=N

Here is a list of models. Look under the section for your card, "ALC22x", and see if any of them sound like your machine. There may be more than one and it will take some trial and error.

Note you can also try the special parameter "model=generic", which can fix a wide range of different problems.

Tip: go into the qubes manager -> VM settings, and make sure "start VM at boot" is unchecked for all VMs. This will make rebooting much faster.

See also

This free account was provided by - report spam to

ONLY AT VFEmail! - Use our Metadata Mitigator to keep your email out of the 
NSA's hands!
$24.95 ONETIME Lifetime accounts with Privacy Features! 15GB disk! No bandwidth quotas! Commercial and Bulk Mail Options!
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
To view this discussion on the web visit

Reply via email to