'Matt Drez' via qubes-users: >> Try just doing the passthrough first. If you can get the NICS to show up >> in `lspci` in the two sys-nets and configure networking so you can ping >> out. >> > >> Command to attach the NIC: `qvm-pci attach sys-net2 dom0:<PCI-address>`. >> > >> PCI-address can be found in the output of `qvm-pci`. > > Those are the exact steps I tried but no luck. > > > I have no problem passing the NIC to the gw and it shows up with lspci but it > won't acquire an IP. The "funny" thing is that as soon as the sys-net starts > the green light goes out on the the NIC. If I issue an `ip addr` command I > cannot even see its MAC. > > > I even tried connecting the second NIC to a completely different network and > router but made no difference. > Are you sure the second NIC works under Qubes, even by itself? Also, if it's dual ports on a single card, try adding a separate physical NIC card.
-- - don't top post Mailing list etiquette: - trim quoted reply to only relevant portions - when possible, copy and paste text instead of screenshots -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/65aa0552-99d1-a195-60ac-3807934d10d5%40danwin1210.me.
