Harlan Stenn wrote: > Thanks - sorry I missed some of that info from you previous message. > > We added initial support for dynamic interfaces in 4.2.4. Numerous > bugfixes and improvements have been added since then. > > I recommend you try the latest -stable code (unless you are up for the > latest -dev code, which we belive is very stable and is about to become > 4.2.8). > > If you are running ntpd on the machine that has the dynamic interface > then it should be detecting this. If your machines are talking to a > router or access point that has the dynamic interface, I'd recommend you > either run NTP on that machine (best solution) or hardwire the NTP > config file on your machines to poll for time once a minute, so when > your link does come up you'll get a few polls in there. >
Thank you for the information, but automatically restarting ntp is not a problem. The configuration is sometimes changing (desktop with router or direct, laptop travelling) and ntp always keeps the time right on both machines.. The only problem I encounter, is a wlan access point, that blocks udp. Did you change that, too? -- Herzliche Grüße! Rolf Muth Meine Adressen duerfen nicht fuer Werbung verwendet werden! PGP: http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xF8DC41935544C89A Palm clock: http://www.heise.de/software/download/analoge_uhr/61872 _______________________________________________ questions mailing list [email protected] http://lists.ntp.org/listinfo/questions
