On Thu, 2011-12-08 at 07:38 +0000, Paul Duncan wrote:
> Hi All,
> 
> Okay, so I have changed the ntp.conf so that it now looks like this:
> 
> server 127.127.20.0 prefer mode 2 minpoll 4 maxpoll 4
> server 127.127.22.0
> 
> tos mindist 0.250
> 
> statistics loopstats
> statsdir /var/log/ntp/
> filegen loopstats file loop type delay enable
> 
> However, ntpdate now says that no servers can be found and ntpq -p is
> still indicating now PPS:
> 
>      remote           refid      st t when poll reach   delay   offset
> jitter
> ==============================================================================
> *GPS_NMEA(0)     .GPS.            0 l    3   16    1    0.000    7.872
> 0.000
> 
> I think this *may* be because I have not added the ATOM driver during
> the configure, so that is what I will try now.

okay, I used ./configure --enable-NMEA --enable-ATOM, and there is still
no change. Where am I going wrong?

Just for completeness, here is the content of /var/log/messages when
ntpd starts:

Dec  8 07:47:21 darkstar ntpd[13368]: ntpd 4.2.6p4@1.2324-o Thu Dec  8
07:46:35 UTC 2011 (2)
Dec  8 07:47:21 darkstar ntpd[13369]: proto: precision = 0.549 usec
Dec  8 07:47:21 darkstar ntpd[13369]: Listen and drop on 0 v4wildcard
0.0.0.0 UDP 123
Dec  8 07:47:21 darkstar ntpd[13369]: Listen and drop on 1 v6wildcard ::
UDP 123
Dec  8 07:47:21 darkstar ntpd[13369]: Listen normally on 2 lo 127.0.0.1
UDP 123
Dec  8 07:47:21 darkstar ntpd[13369]: Listen normally on 3 eth0
139.166.244.144 UDP 123
Dec  8 07:47:21 darkstar ntpd[13369]: Listen normally on 4 eth0
fe80::215:60ff:fe4e:915b UDP 123
Dec  8 07:47:21 darkstar ntpd[13369]: Listen normally on 5 lo ::1 UDP
123
Dec  8 07:47:21 darkstar ntpd[13369]: peers refreshed
Dec  8 07:47:21 darkstar ntpd[13369]: Listening on routing socket on fd
#22 for interface updates
Dec  8 07:47:21 darkstar ntpd[13369]: GPS_NMEA(0) serial /dev/gps0 open
at 4800 bps
Dec  8 07:47:21 darkstar ntpd[13369]: 127.127.22.0 interface 127.0.0.1
-> (none)

Thanks again,

Paul.


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

_______________________________________________
questions mailing list
questions@lists.ntp.org
http://lists.ntp.org/listinfo/questions

Reply via email to