On 10/11/2014 09:43, Rob wrote:
I compiled ntp-dev 4.2.7p448 on the CubieBoard2 (ARM processor) and added
a "pool pool.ntp.org" line to the config. It does not work. Output
of ntpq -pn is:
pool.ntp.org .POOL. 16 p - 64 0 0.000 0.000 0.002
When I change "pool" to "server" it works OK, but of course it is hardwired
to a single server selected at boottime.
Is there any known problem with this?
The pool directive works correctly here, but sometimes it can take a
little while for the servers below the pool line to appear. Apologies
in advance for the wrap.....
uk.pool.ntp.org .POOL. 16 p - 1024 0 0.000 0.000
0.000
-130.88.200.6 130.88.212.143 3 u 736 1024 377 24.191 2.569
0.886
-129.215.160.240 129.215.64.32 2 u 490 1024 377 25.375 2.768
0.599
-178.18.118.14 195.66.241.3 2 u - 1024 377 19.538 1.891
1.133
-176.126.242.239 193.62.22.82 2 u 230 1024 277 29.775 9.785
1.745
or as an image:
http://www.satsignal.eu/ntp/ntp-setup-L1.png
--
Cheers,
David
Web: http://www.satsignal.eu
_______________________________________________
questions mailing list
[email protected]
http://lists.ntp.org/listinfo/questions
