David Taylor <[email protected]> wrote: > On 10/11/2014 09:43, Rob wrote: >> I compiled ntp-dev 4.2.7p448 on the CubieBoard2 (ARM processor) and added >> a "pool pool.ntp.org" line to the config. It does not work. Output >> of ntpq -pn is: >> >> pool.ntp.org .POOL. 16 p - 64 0 0.000 0.000 >> 0.002 >> >> When I change "pool" to "server" it works OK, but of course it is hardwired >> to a single server selected at boottime. >> >> Is there any known problem with this? > > The pool directive works correctly here, but sometimes it can take a > little while for the servers below the pool line to appear. Apologies > in advance for the wrap..... > > uk.pool.ntp.org .POOL. 16 p - 1024 0 0.000 0.000 > 0.000 > -130.88.200.6 130.88.212.143 3 u 736 1024 377 24.191 2.569 > 0.886 > -129.215.160.240 129.215.64.32 2 u 490 1024 377 25.375 2.768 > 0.599 > -178.18.118.14 195.66.241.3 2 u - 1024 377 19.538 1.891 > 1.133 > -176.126.242.239 193.62.22.82 2 u 230 1024 277 29.775 9.785 > 1.745
After about 3 hours, still only the POOL line with zero reach. Is "pool" supposed to work when you have other (hardwired) servers as well? I tried to use 2 of my own servers plus a pool directive for redundancy. _______________________________________________ questions mailing list [email protected] http://lists.ntp.org/listinfo/questions
