> Does open source ntpd support using IPv6 link local addresses for
> client/server/peer modes? I have not been able to use link local addresses
> to peer 2 servers on the same subnet.
4.2.8p2 does work!
config:
server -6 fe80::225:90ff:fe18:76b0%br0
^^^^ interface name
ntpq -pn:
remote refid st t when poll reach delay offset jitter
==============================================================================
-172.23.0.8 193.225.55.3 2 u 37 64 3 0.086 0.031 0.020
-172.23.0.9 228.143.95.23 2 u 37 64 3 0.179 -0.006 0.004
fe80::225:90ff: 185.219.2.214 2 u 36 64 3 0.165 0.055 0.008
*2001:738:0:1::9 .GPS. 1 u 33 64 3 4.760 0.082 0.070
+2001:738:0:101: .GPS. 1 u 39 64 3 8.246 0.077 0.016
-2001:738:0:413: .GPS. 1 u 38 64 3 4.510 0.046 0.010
Regards
Gabor
_______________________________________________
questions mailing list
[email protected]
http://lists.ntp.org/listinfo/questions
