You can now disregard this. Nortel swooped in this AM, and have 
updated the software on the Annex. Full accounting detail is now 
being squirted into Radiator.

--
Stephen Ollis <[EMAIL PROTECTED]>   Ph: +61 2 9911 1606(BH)  
Team Leader, Server Systems - Network Engineering  +61 2 9911 1555(FAX)
AT&T EasyLink Services, Lvl 8, 15 Orion Rd, Lane Cove, NSW 2066
Australia
'There is no traffic jam on the extra mile.' - Zig Ziegler 
 

> -----Original Message-----
> From: Stephen Ollis [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, February 17, 1999 10:32 AM
> To: Mike McCauley; [EMAIL PROTECTED]
> Subject: RE: (RADIATOR) How to get detail file logging with 
> AuthBY file.
> 
> 
> The detail file is being created, and SOMETIMES I get a Modem-Start
> accounting record dropped. I don't however get true start or stop
> records. When using the radpwtst program, I DO get start/stop records
> generated.
> 
> The acct_port1 and acct_host1 are set correctly. The secret is correct
> as shown by correct authentication.
> 
> I am running 2.13beta as per your instructions. Will download 
> 2.12.1 and
> test the configuration on a second platform.
> 
> --
> Stephen Ollis <[EMAIL PROTECTED]>   Ph: +61 2 9911 
> 1606(BH)  
> Team Leader, Server Systems - Network Engineering  +61 2 9911 
> 1555(FAX)
> AT&T EasyLink Services, Lvl 8, 15 Orion Rd, Lane Cove, NSW 2066
> Australia
> 'There is no traffic jam on the extra mile.' - Zig Ziegler 
>  
> 
> > -----Original Message-----
> > From: Mike McCauley [mailto:[EMAIL PROTECTED]]
> > Sent: Wednesday, February 17, 1999 6:51 AM
> > To: Stephen Ollis; [EMAIL PROTECTED]
> > Subject: Re: (RADIATOR) How to get detail file logging with 
> > AuthBY file.
> > 
> > 
> > Hi Stephen.
> > 
> > from your config file, the logs should be dropped at
> > /usr/local/radius/radacct/detail
> > 
> > Does radiator have permission to write to 
> > /usr/local/radius/radacct/detail?
> > Does the file exist? What are its permissions? Are there any 
> > errors reported in
> > the Radiator log file?
> > 
> > Cheers.
> > 
> > On Feb 16, 11:07am, Stephen Ollis wrote:
> > > Subject: (RADIATOR) How to get detail file logging with 
> AuthBY file.
> > > I'm trying to get detail logs dropped from RADIATOR, but
> > > I'm not getting anything at all. I get validated and
> > > granted access by the NAS fine..
> > >
> > > <Client DEFAULT>
> > >         IgnoreAcctSignature
> > >         Secret OurSecret
> > > </Client>
> > >
> > > <Realm>
> > >         <AuthBy FILE>
> > >                 # Defaults to %D/users It only needs usernames
> > >                 # and password in it
> > >                 Filename %D/dialup.users
> > >
> > >                 DefaultReply Framed-Protocol = PPP,\
> > >                  Framed-IP-Netmask = 255.255.255.255,\
> > >                  Framed-Routing = None,\
> > >                  Framed-MTU = 1500,\
> > >                  Ascend-Client-Primary-DNS = 202.10.0.36,\
> > >                  Ascend-Client-Secondary-DNS = 202.10.0.66
> > >         </AuthBy>
> > >         # Where do we write the accounting file
> > >         AcctLogFileName /usr/local/radius/radacct/detail
> > > </Realm>
> > > --
> > > Stephen Ollis <[EMAIL PROTECTED]>   Ph: +61 2 
> > 9911 1606(BH)
> > > Team Leader, Server Systems - Network Engineering  +61 2 
> > 9911 1555(FAX)
> > > AT&T EasyLink Services, Lvl 8, 15 Orion Rd, Lane Cove, NSW 2066
> > > Australia
> > > 'There is no traffic jam on the extra mile.' - Zig Ziegler
> > >
> > >
> > > ===
> > > To unsubscribe, email '[EMAIL PROTECTED]' with
> > > 'unsubscribe radiator' in the body of the message.
> > >-- End of excerpt from Stephen Ollis
> > 
> > 
> > 
> > -- 
> > Mike McCauley                                [EMAIL PROTECTED]
> > Open System Consultants Pty. Ltd             Unix, Motif, C++, WWW
> > 24 Bateman St Hampton, VIC 3188 Australia    Consulting and 
> > development
> > Phone, Fax: +61 3 9598-0985                  http://www.open.com.au
> > 
> > Radiator: the most portable, flexible and configurable 
> RADIUS server 
> > anywhere. SQL, proxy, DBM, files, LDAP, NIS+, password, NT, 
> Emerald, 
> > Platypus, Freeside, external, etc etc etc on Unix, Win95, 
> NT, Rhapsody
> > 
> 
> ===
> To unsubscribe, email '[EMAIL PROTECTED]' with
> 'unsubscribe radiator' in the body of the message.
> 

===
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.

Reply via email to