Dear Gentilmen:
 
We are starting the tests with radiator here at our ISP. The software was installed on a Windows NT 4 Server (SP5, IIS4, RRAS - not active) 128 Mb RAM following the install instruction that are in the "Installation and Reference Manual for Radiator v. 2.13.1". The software worked very well when I tested it with "RADPWTST",  "Ascend MAX 6000" and "NT - RRAS" connections. The only problem I have encountered is making radiator start as a system service. I have already downloaded SRVANY and INSTSRV and installed them in the "c:\reskit" folder. My radiator path is ->> c:\radiator\radiusd , and my perl path is ->> c:\perl\bin\perl.exe , following is my .cfg file and the regedt entrence I have created:
 
CONFIG FILE:
###############################
 
Foreground
LogStdout
Trace            4
AuthPort       1645
AcctPort       1646
LogDir         c:\radiator\malbanet\log
LogFile        \%Y%m%d.log
DbDir          
DictionaryFile  dictionary.nt
 
# You will probably want to change this to suit your site.
 
<Client localhost>
 
 Secret  mysecret
 DupInterval 0
 
</Client>
 
<Client XXX.YYY.ZZZ.x>
 
 Secret  mysecret
 DupInterval 0
 
</Client>
 
<Client XXX.YYY.ZZZ.x>
 
 Secret  mysecret
 DupInterval 0
 
</Client>
 
<Client XXX.YYY.ZZZ.x>
 
 Secret  mysecret
 DupInterval 0
 
</Client>
 
<Realm DEFAULT>
 
# Limit all users in this realm to max of 1 session
 MaxSessions     1
 
 <AuthBy NT>
 </AuthBy>
 
# Log all accounting into daily log files in LogDir
 AcctLogFileName %L\%Y%m%d.act
 
</Realm>
 
###############################
 
Here I have exported the radiator key from the registry
 
 
################################
 
REGEDIT4
 
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\radiator]
"Type"=dword:00000010
"Start"=dword:00000002
"ErrorControl"=dword:00000001
"ImagePath"=hex(2):63,3a,5c,72,65,73,6b,69,74,5c,73,72,76,61,6e,79,2e,65,78,65,\
  00
"DisplayName"="radiator"
"ObjectName"="LocalSystem"
 
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\radiator\Parameters]
"Application"="c:\\perl\\bin\\perl.exe c:\\radiator\\radiusd -config_file c:\\radiator\\maxnt.cfg"
 
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\radiator\Security]
"Security"=hex:01,00,14,80,c0,00,00,00,cc,00,00,00,14,00,00,00,34,00,00,00,02,\
  00,20,00,01,00,00,00,02,80,18,00,ff,01,0f,00,01,01,00,00,00,00,00,01,00,00,\
  00,00,20,02,00,00,02,00,8c,00,05,00,00,00,00,00,18,00,8d,01,02,00,01,01,00,\
  00,00,00,00,01,00,00,00,00,00,00,00,00,00,00,1c,00,fd,01,02,00,01,02,00,00,\
  00,00,00,05,20,00,00,00,23,02,00,00,00,00,00,00,00,00,1c,00,ff,01,0f,00,01,\
  02,00,00,00,00,00,05,20,00,00,00,20,02,00,00,00,00,00,00,00,00,1c,00,ff,01,\
  0f,00,01,02,00,00,00,00,00,05,20,00,00,00,25,02,00,00,00,00,00,00,00,00,18,\
  00,fd,01,02,00,01,01,00,00,00,00,00,05,12,00,00,00,25,02,00,00,01,01,00,00,\
  00,00,00,05,12,00,00,00,01,01,00,00,00,00,00,05,12,00,00,00
 
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\radiator\Enum]
"0"="Root\\LEGACY_RADIATOR\\0000"
"Count"=dword:00000001
"NextInstance"=dword:00000001
 
################################
 
I hope these info help, cause I have read all the manual and didn't figure it out.
 
Best Reagrds
Michael Gatti
Malbanet Serviços Online
Caxias do Sul - RS - Brazil

Reply via email to