Brian,
Add:
aaa accounting update newinfo
You need 11.3 or higher if I'm not mistaken. Cisco doesn't send the
Framed-IP-Address in the Start packet like some others do - however,
radiator will handle the Alive packet that the above command sends once
the user has authenticated PPP and has a Framed address.
--------------------------------------------------------------------------
Aaron Holtz
ComNet Inc.
UNIX Systems Administration/Network Operations
"It's not broken, it just lacks duct tape."
--------------------------------------------------------------------------
On Nov 15, Brian Morris molded the electrons to say....
>Hi All,
>
>I have setup some Cisco 2511's to authenticate with Radiator and they are
>all working fine, users can get on etc without any troubles at all.
>
>However, the 2511 does not report the IP address it allocated to the user
>into Radiator at all. Other NAS's are working fine, so I suspect it is
>something in the cisco 2511 config.
>
>Has anyone else had this problem? How would I fix it?
>
>Config details follow...
>
>Regards, Brian Morris.
>
>
>IOS 11.1.24
>
>aaa new-model
>aaa authentication login TELNET-USERS local
>aaa authentication login no_radius enable
>aaa authentication login consoleport none
>aaa authentication ppp default if-needed radius
>aaa authorization network radius
>aaa accounting exec start-stop radius
>aaa accounting network start-stop radius
>aaa accounting connection start-stop radius
>aaa accounting system start-stop radius
>
>
>
>
>
>===
>Archive at http://www.thesite.com.au/~radiator/
>To unsubscribe, email '[EMAIL PROTECTED]' with
>'unsubscribe radiator' in the body of the message.
>
===
Archive at http://www.thesite.com.au/~radiator/
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.
