Yes, I believe that the radiator code looks for the Alive packet as well
as a Start packet just for this case. Be sure you are running a newer
version of radiator - I believe that 2.13 and up should support it, but
don't quote me on that.
--------------------------------------------------------------------------
Aaron Holtz
ComNet Inc.
UNIX Systems Administration/Network Operations
"It's not broken, it just lacks duct tape."
--------------------------------------------------------------------------
On Nov 15, Brian Morris molded the electrons to say....
>Thanks Aaron,
>
>Yes, the alive packet does have the IP address, but unless I am mistaken
>this does not get inserted into RADONLINE which is what I would really
>like.
>
>Is there a way around this?
>
>
>
>----- Original Message -----
>From: Aaron Holtz <[EMAIL PROTECTED]>
>To: Brian Morris <[EMAIL PROTECTED]>
>Cc: <[EMAIL PROTECTED]>
>Sent: Monday, November 15, 1999 1:31 PM
>Subject: Re: (RADIATOR) Cisco 2511 - Not supplying allocated IP address
>toRadiator
>
>
>> Brian,
>>
>> Add:
>>
>> aaa accounting update newinfo
>>
>> You need 11.3 or higher if I'm not mistaken. Cisco doesn't send the
>> Framed-IP-Address in the Start packet like some others do - however,
>> radiator will handle the Alive packet that the above command sends once
>> the user has authenticated PPP and has a Framed address.
>>
>> --------------------------------------------------------------------------
>> Aaron Holtz
>> ComNet Inc.
>> UNIX Systems Administration/Network Operations
>> "It's not broken, it just lacks duct tape."
>> --------------------------------------------------------------------------
>>
>> On Nov 15, Brian Morris molded the electrons to say....
>>
>> >Hi All,
>> >
>> >I have setup some Cisco 2511's to authenticate with Radiator and they are
>> >all working fine, users can get on etc without any troubles at all.
>> >
>> >However, the 2511 does not report the IP address it allocated to the user
>> >into Radiator at all. Other NAS's are working fine, so I suspect it is
>> >something in the cisco 2511 config.
>> >
>> >Has anyone else had this problem? How would I fix it?
>> >
>> >Config details follow...
>> >
>> >Regards, Brian Morris.
>> >
>> >
>> >IOS 11.1.24
>> >
>> >aaa new-model
>> >aaa authentication login TELNET-USERS local
>> >aaa authentication login no_radius enable
>> >aaa authentication login consoleport none
>> >aaa authentication ppp default if-needed radius
>> >aaa authorization network radius
>> >aaa accounting exec start-stop radius
>> >aaa accounting network start-stop radius
>> >aaa accounting connection start-stop radius
>> >aaa accounting system start-stop radius
>> >
>> >
>> >
>> >
>> >
>> >===
>> >Archive at http://www.thesite.com.au/~radiator/
>> >To unsubscribe, email '[EMAIL PROTECTED]' with
>> >'unsubscribe radiator' in the body of the message.
>> >
>>
>>
>> ===
>> Archive at http://www.thesite.com.au/~radiator/
>> To unsubscribe, email '[EMAIL PROTECTED]' with
>> 'unsubscribe radiator' in the body of the message.
>
===
Archive at http://www.thesite.com.au/~radiator/
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.
