Hello Hugh,
Thank for the solution, I used Service-Type = Outbound-User handler to
pre-authenticate.
Regards,
Lisa
> Hello Lisa -
>
> On Fri, 24 Nov 2000, Lisa Goulet wrote:
> > Hi Hugh,
> >
> > Here's a trace for the preauthentication.
> >
> > If you'd like, here's a URL for Cisco's preauthentication doc(it's a
> short
> > one).
> >
> >
> http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121newft/1
> 21
> > t/121t2/dtpreaut.htm#45657
> >
> > Thanks a million,
> > Lisa
> >
> >
> > Fri Nov 24 09:50:17 2000: INFO: Server started: Radiator 2.16.3 on
> > ns1.versatel.net
> > Fri Nov 24 10:01:57 2000: DEBUG: Packet dump:
> > *** Received from x.x.x.x port 1645 ....
> > Code: Access-Request
> > Identifier: 28
> > Authentic: <31>8<203><178>T<253><203><10><207>0<237>)<240>H<238><154>
> > Attributes:
> > NAS-IP-Address = x.x.x.x
> > Cisco-NAS-Port = "Serial1/1/11:0*"
> > NAS-Port-Type = ISDN
> > User-Name = "207500370"
> > Called-Station-Id = "207500370"
> > Calling-Station-Id = "207505640"
> > User-Password =
> > "<209><168>;*<13><18><131><177>K]<191><156><175><166><198><31>"
> > Service-Type = Outbound-User
> >
>
> As you can see from the trace above, the packet contains the
> Called-Station-Id
> as the User-Name, and a Service-Type of Outbound-User. So you can set up a
> Handler , usually with an AuthBy PORTLIMITCHECK, like this:
>
> # configuration for Pre-Authentication
>
> <Handler Service-Type = Outbound-User>
> <AuthBy PORTLIMITCHECK>
> .....
> </AuthBy>
> </Handler>
>
> .....
>
> hth
>
> Hugh
>
>
> --
> Radiator: the most portable, flexible and configurable RADIUS server
> anywhere. Available on *NIX, *BSD, Windows 95/98/2000, NT, MacOS X.
> -
> Nets: internetwork inventory and management - graphical, extensible,
> flexible with hardware, software, platform and database independence.
>
>
> ===
> Archive at http://www.starport.net/~radiator/
> Announcements on [EMAIL PROTECTED]
> To unsubscribe, email '[EMAIL PROTECTED]' with
> 'unsubscribe radiator' in the body of the message.
===
Archive at http://www.starport.net/~radiator/
Announcements on [EMAIL PROTECTED]
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.
