Hi,
I'm having difficulty with setting up a tunnel with Nortel CVX:
Here's the tunnel part of my config file:
AddToReply Tunnel-Type = 3,\
Tunnel-Medium-Type = 1, \
Tunnel-ID = lns,\
Tunnel-Password = lns,\
Tunnel-Client-Endpoint = lns, \
Tunnel-Server-Endpoint = "\00062.58.88.46 ppp"
Here's a trace of tunnel parameters being sent out by the radiator:
*** Sending to xxx.xxx.xxx.xxx port 2048 ....
Code: Access-Accept
Identifier: 105
Authentic: K<3>:hb<27>?<198>=<19><<20><21>e<1>c
Attributes:
CVX-VPOP-ID = 30
Tunnel-Type = 3
Tunnel-Medium-Type = 1
Tunnel-ID = "lns"
Tunnel-Password =
"<0><213><154>F~<235>]<191><151>.Mm7<146><151><240><220>R<247>"
Tunnel-Client-Endpoint = "lns"
Tunnel-Server-Endpoint = "<0>62.58.88.46 ppp"
Here's a trace on the CVX side, note that Tunnel-Type is being interpreted
as Vendor-Specific 26:
radius: Access-Accept (2) from server 62.58.62.132, id 106,
length 112, time 64 ms
radius: auth c9 c7 ca 9e ef 89 a6 47
radius: 0c cd b4 04 04 ae c1 9f
Vendor-Specific [26, len 10] = <2637>
CVX-VPOP-Id [2, len 4] = <30>
Vendor-Specific [26, len 10] = <307>
unknown [64, len 4] = <00 00 00 03>
Vendor-Specific [26, len 10] = <307>
unknown [65, len 4] = <00 00 00 01>
Tunnel-Id [68, len 3] = <lns>
Vendor-Specific [26, len 25] = <307>
unknown [69, len 19] = <00 b9 32 a4 67 11 76
b7 ...>
Tunnel-Client-Endpoint [66, len 3] = <lns>
Vendor-Specific [26, len 17] = <307>
unknown [67, len 11] = <36 32 2e 35 38 2e 38 38 ...>
I appreciate any help,
Lisa
===
Archive at http://www.starport.net/~radiator/
Announcements on [EMAIL PROTECTED]
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.
