frankd wrote: > I have been running several Vonets during the last couple of months (3 > VAP11G-300 and 1 VAP11N-300). > The VAP11N-300 got very hot and the LEDs coulldn't be easy covered with > tape (it got also hot without tape). > Today the VAP11N-300 died (probably victim to the heat). > All other three VAP11G-300 are running without problem and are not > running hot. > I think the "G" version is a good option if the wlanpoke script cannot > solve the dropouts. Also Vonet regularly updates the firmware and you > can program the Vonets that they connect to the Access Point with the > strongest signal if you have several ones. > Thus overall a good solution for Radios, however use the G version not > the N version of the Vonets...
My VAP11N-300 died after less than a year of use. I didn't both trying to return it saying as I'm using it out of spec. I bought a TP-Link passthrough powerline adapter instead. It's a little bulkier at the wall socket, but it's not too bad. Meanwhile, my power supply failed on one of my Radios and the other Radio (which has been sat on my desk unpowered for a few months) is refusing to power on. I need to debug that next. Ugh. ------------------------------------------------------------------------ omnium21's Profile: http://forums.slimdevices.com/member.php?userid=70334 View this thread: http://forums.slimdevices.com/showthread.php?t=109953 _______________________________________________ Radio mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/radio
