Folks, I've just set up a couple of SB Radios for left and right - I've had a single (black) box for a decade or so, but have recently acquired another (red) box for a stereo compliment of SB Radios.
I have noticed that the syncing can at times slip a little and this has a noticeable effect on the stereo. After a little investigation I ended up with this piece in a SOS article: https://www.soundonsound.com/techniques/creating-using-custom-delay-effects#para8 So, delays of around the 10-15ms mark are used for stereo widening effects - which confirmed what I was wondering - that I needed to tighten the syncing delays... And, checking 'Minimum Synchronization Adjustment (ms)' setting my suspicions were further confirmed - that setting was at 10ms - right where you would expect it to be if you were *trying* to create stereo widening effects. So, I attempted to reduce the delay to 5ms - but, it seems that 10ms is the minimum setting - at least through the GUI. Is there a configuration setting anywhere in the slimserver config files that might allow for a lower - say 5ms - sync adjustment? I realise this might be asking more of the system than it's able to manage, but computing speed has come up a little since this code was written. Another spanner to throw into the works - which might well negate any reduction in sync adjustment - is that I checked the network latency between slimserver and it was between 6-8ms and so I've adjusted up the 'Network Packet Latency (ms)' from 2ms to 8ms. Perhaps this post would be better off under LMS forum? Thanks for the fun :) M ------------------------------------------------------------------------ pseud's Profile: http://forums.slimdevices.com/member.php?userid=41902 View this thread: http://forums.slimdevices.com/showthread.php?t=116006 _______________________________________________ Radio mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/radio
