If it’s made by Cisco and its running NX-OS, it can’t be an ASR9k: https://www.cisco.com/c/en/us/products/ios-nx-os-software/nx-os/index.html (The non-advertised thing is that UCS also runs NX-OS under the hood.)
If it’s a “C93108TC-EX”, then it’s likely a Nexus 93108TC-EX: https://www.cisco.com/c/en/us/support/switches/nexus-93108tc-ex-switch/model.html Are you running it in ACI or NXOS mode? Actually nevermind, 7-point-anything is non-ACI. To make certain about the hardware type, can you do a “show version | include hassis ; show version | inc ersion” (yes, with those first letters missing to avoid capitalization issues) and send the output? This is what I get one of my ASR 9k: RP/0/RSP0/CPU0:Comm595-bdr-gw01#show version | include hassis ; show version | include ersion #sh ver | include hassis Fri Feb 9 00:36:45.478 EST ASR-9001 Chassis #show ver | inc ersion Fri Feb 9 00:36:53.058 EST Cisco IOS XR Software, Version 5.3.3[Default] ROM: System Bootstrap, Version 2.04(20140227:092320) [ASR9K ROMMON], RP/0/RSP0/CPU0:Comm595-bdr-gw01# And one of my Nexus 9k: cumm111-0b05es63# show version | include hassis ; show version | include ersion cisco Nexus9000 C9372PX chassis the GNU General Public License (GPL) version 2.0 or GNU General Public License (GPL) version 3.0 or the GNU Lesser General Public License (LGPL) Version 2.1 or Lesser General Public License (LGPL) Version 2.0. BIOS: version 07.59 NXOS: version 7.0(3)I5(2) System version: 7.0(3)I5(2) cumm111-0b05es63# weylin From: Pico Leto <picoleto...@gmail.com> Date: Friday, February 9, 2018 at 12:17 AM To: Weylin Piegorsch <wey...@bu.edu> Cc: "rancid-discuss@shrubbery.net" <rancid-discuss@shrubbery.net> Subject: Re: [rancid] Role Privileges for Nexus 9k Hi, I'm definitely running NX-OS however running the debug under cisco-xr gives me better results, with the exception that the end of run isn't found $ rancid -t cisco-xr -d host.xx. loadtype: device type cisco-xr loadtype: found device type cisco-xr in /usr/local/rancid/etc/rancid.types.base executing clogin -t 90 -c"terminal no-timestamp;terminal exec prompt no-timestamp;admin show version;admin show install summary;admin show license udi;admin show license;admin show variables boot;admin show hw-module fpd location all;show redundancy secondary;show install active;admin show env all;dir /all nvram:;dir /all bootflash:;dir /all compactflash:;dir /all compactflasha:;dir /all slot0:;dir /all disk0:;dir /all disk0a:;dir /all slot1:;dir /all disk1:;dir /all disk1a:;dir /all slot2:;dir /all disk2:;dir /all harddisk:;dir /all harddiska:;dir /all harddiskb:;show controllers;admin show diag;admin show inventory raw;show vlan;show debug;show rpl maximum;admin show running;show running-config" host.xx. PROMPT MATCH: host.xx# HIT COMMAND:host.xx# terminal no-timestamp In RunCommand: host.xx# terminal no-timestamp HIT COMMAND:host.xx# terminal exec prompt no-timestamp In RunCommand: host.xx# terminal exec prompt no-timestamp HIT COMMAND:host.xx# admin show version In ShowVersion: host.xx# admin show version HIT COMMAND:host.xx# admin show install summary In ShowInstallSummary: host.xx# admin show install summary HIT COMMAND:host.xx# admin show license u In ShowLicense: host.xx# admin show license udi HIT COMMAND:host.xx# admin show license In ShowLicense: host.xx# admin show license HIT COMMAND:host.xx# admin show variables boot In ShowBootVar: host.xx# admin show variables boot HIT COMMAND:host.xx# admin show hw-module fpd location all In ShowRunning: host.xx# admin show hw-module fpd location all HIT COMMAND:host.xx# show redundancy secondary In ShowRedundancy: host.xx# show redundancy secondary HIT COMMAND:host.xx# show install active In ShowInstallActive: host.xx# show install active HIT COMMAND:host.xx# admin show env all In ShowEnv: host.xx# admin show env all HIT COMMAND:host.xx# dir /all nvram: In DirSlotN: host.xx# dir /all nvram: HIT COMMAND:host.xx# dir /all bootflash: In DirSlotN: host.xx# dir /all bootflash: HIT COMMAND:host.xx# dir /all compactflash: In DirSlotN: host.xx# dir /all compactflash: HIT COMMAND:host.xx# dir /all compactflasha: In DirSlotN: host.xx# dir /all compactflasha: HIT COMMAND:host.xx# dir /all slot0: In DirSlotN: host.xx# dir /all slot0: HIT COMMAND:host.xx# dir /all disk0: In DirSlotN: host.xx# dir /all disk0: HIT COMMAND:host.xx# dir /all disk0a: In DirSlotN: host.xx# dir /all disk0a: HIT COMMAND:host.xx# dir /all slot1: In DirSlotN: host.xx# dir /all slot1: HIT COMMAND:host.xx# dir /all disk1: In DirSlotN: host.xx# dir /all disk1: HIT COMMAND:host.xx# dir /all disk1a: In DirSlotN: host.xx# dir /all disk1a: HIT COMMAND:host.xx# dir /all slot2: In DirSlotN: host.xx# dir /all slot2: HIT COMMAND:host.xx# dir /all disk2: In DirSlotN: host.xx# dir /all disk2: HIT COMMAND:host.xx# dir /all harddisk: In DirSlotN: host.xx# dir /all harddisk: HIT COMMAND:host.xx# dir /all harddiska: In DirSlotN: host.xx# dir /all harddiska: HIT COMMAND:host.xx# dir /all harddiskb: In DirSlotN: host.xx# dir /all harddiskb: HIT COMMAND:host.xx# show controllers In ShowContAll: host.xx# show controllers HIT COMMAND:host.xx# admin show diag In ShowDiag: host.xx# admin show diag HIT COMMAND:host.xx# admin show inventory raw In ShowInventory: host.xx# admin show inventory raw HIT COMMAND:host.xx# show vlan In ShowVLAN: host.xx# show vlan HIT COMMAND:host.xx# show debug In ShowDebug: host.xx# show debug HIT COMMAND:host.xx# show rpl maximum In ShowRPL: host.xx# show rpl maximum HIT COMMAND:host.xx# admin show running In ShowRunning: host.xx# admin show running HIT COMMAND:host.xx# show running-config In WriteTerm: host.xx# show running-config host.xx.: End of run not found host.xx.: found_end is false On Thu, Feb 8, 2018 at 1:33 PM, Piegorsch, Weylin William <wey...@bu.edu<mailto:wey...@bu.edu>> wrote: Doesn’t ASR9k run IOS XR (rancid type “ios-xr”)? I didn’t think it supported NX-OS. I’ve only seen NX-OS on Nexus (including N9k), MDS, and UCS devices. weylin From: Pico Leto <picoleto...@gmail.com<mailto:picoleto...@gmail.com>> Date: Wednesday, February 7, 2018 at 2:05 PM To: <rancid-discuss@shrubbery.net<mailto:rancid-discuss@shrubbery.net>> Subject: [rancid] Role Privileges for Nexus 9k Hi, I seem to be having some troubles backing up my configs for a ASR9k (C93108TC-EX) running NXOS 7.0.3.I4.4. My current version of rancid is 3.7 I thought I created the correct role for rancid to run under however my debug seems to end after 'system redundancy status'. The command is actually available however you have to be in config term mode to see the output. Role: rancid Description: rancid restricted access Vlan policy: permit (default) Interface policy: permit (default) Vrf policy: permit (default) ------------------------------------------------------------------- Rule Perm Type Scope Entity ------------------------------------------------------------------- 4 permit command dir * 3 permit command show * 2 permit command terminal * 1 permit command show running-config Debug: rancid -t cisco-nx -d host.xx.xx loadtype: device type cisco-nx loadtype: found device type cisco-nx in /usr/local/rancid/etc/rancid.types.base executing clogin -t 90 -c"term no monitor-force;show version;show version build-info all;show license;show license usage;show license host.xx.xx-id;show system redundancy status;show environment clock;show environment fan;show environment fex all fan;show environment temperature;show environment power;show boot;dir bootflash:;dir debug:;dir logflash:;dir slot0:;dir usb1:;dir usb2:;dir volatile:;show module;show module xbar;show inventory;show vtp status;show vlan;show debug;show cores vdc-all;show processes log vdc-all;show module fex;show fex;show running-config" host.xx.xx PROMPT MATCH: host.xx# HIT COMMAND:host.xx# term no monitor-force In RunCommand: host.xx# term no monitor-force HIT COMMAND:host.xx# show version In ShowVersion: host.xx# show version TYPE = NXOS HIT COMMAND:host.xx# show version build-info all In ShowVersionBuild: host.xx# show version build-info all HIT COMMAND:host.xx# show license In ShowLicense: host.xx# show license HIT COMMAND:host.xx# show license usage In ShowLicense: host.xx# show license usage HIT COMMAND:host.xx# show license host.xx.xx-id In ShowLicense: host.xx# show license host.xx.xx-id HIT COMMAND:host.xx# show system redundancy status In ShowRedundancy: host.xx# show system redundancy status host.xx.xx: show system redundancy status failed: -1 host.xx.xx: missed cmd(s): show environment clock, show environment fan, show environment fex all fan, show environment temperature, show environment power, show boot, dir bootflash:, dir debug:, dir logflash:, dir slot0:, dir usb1:, dir usb2:, dir volatile:, show module, show module xbar, show inventory, show vtp status, show vlan, show debug, show cores vdc-all, show processes log vdc-all, show module fex, show fex host.xx.xx: End of run not found host.xx.xx: clean_run is false host.xx.xx: found_end is false
_______________________________________________ Rancid-discuss mailing list Rancid-discuss@shrubbery.net http://www.shrubbery.net/mailman/listinfo/rancid-discuss