Wed, Feb 07, 2018 at 11:05:19AM -0800, Pico Leto: > Hi, > > I seem to be having some troubles backing up my configs for a ASR9k > (C93108TC-EX) running NXOS 7.0.3.I4.4. My current version of rancid is 3.7 > > I thought I created the correct role for rancid to run under however my > debug seems to end after 'system redundancy status'. The command is > actually available however you have to be in config term mode to see the > output. > > Role: rancid > Description: rancid restricted access > Vlan policy: permit (default) > Interface policy: permit (default) > Vrf policy: permit (default) > ------------------------------------------------------------------- > Rule Perm Type Scope Entity > ------------------------------------------------------------------- > 4 permit command dir * > 3 permit command show * > 2 permit command terminal * > 1 permit command show running-config > > Debug: > > rancid -t cisco-nx -d host.xx.xx > loadtype: device type cisco-nx > loadtype: found device type cisco-nx in > /usr/local/rancid/etc/rancid.types.base > executing clogin -t 90 -c"term no monitor-force;show version;show version > build-info all;show license;show license usage;show license > host.xx.xx-id;show system redundancy status;show environment clock;show > environment fan;show environment fex all fan;show environment > temperature;show environment power;show boot;dir bootflash:;dir debug:;dir > logflash:;dir slot0:;dir usb1:;dir usb2:;dir volatile:;show module;show > module xbar;show inventory;show vtp status;show vlan;show debug;show cores > vdc-all;show processes log vdc-all;show module fex;show fex;show > running-config" host.xx.xx > PROMPT MATCH: host.xx# > HIT COMMAND:host.xx# term no monitor-force > In RunCommand: host.xx# term no monitor-force > HIT COMMAND:host.xx# show version > In ShowVersion: host.xx# show version > TYPE = NXOS > HIT COMMAND:host.xx# show version build-info all > In ShowVersionBuild: host.xx# show version build-info all > HIT COMMAND:host.xx# show license > In ShowLicense: host.xx# show license > HIT COMMAND:host.xx# show license usage > In ShowLicense: host.xx# show license usage > HIT COMMAND:host.xx# show license host.xx.xx-id > In ShowLicense: host.xx# show license host.xx.xx-id > HIT COMMAND:host.xx# show system redundancy status > In ShowRedundancy: host.xx# show system redundancy status > host.xx.xx: show system redundancy status failed: -1 > host.xx.xx: missed cmd(s): show environment clock, show environment fan,
There was a recent change for show red and show env fex recently: nxos.pm: filter show redundancy/show env fex when unsupported which you can grab here: http://rancid.shrubbery.net/rancid/svn/rancid/trunk/rancid/lib/nxos.pm.in Weylin's good advice aside, perhaps try running it as a user whose account is not limited to ensure that it is not a failure of rancid itself due to some caveat of the platform. You can also look at the output of what rancid collects and look for authorization falures: rancid -t cisco-nx -C device will give you the full command that rancid would run. > show environment fex all fan, show environment temperature, show > environment power, show boot, dir bootflash:, dir debug:, dir logflash:, > dir slot0:, dir usb1:, dir usb2:, dir volatile:, show module, show module > xbar, show inventory, show vtp status, show vlan, show debug, show cores > vdc-all, show processes log vdc-all, show module fex, show fex > host.xx.xx: End of run not found > host.xx.xx: clean_run is false > host.xx.xx: found_end is false > _______________________________________________ > Rancid-discuss mailing list > Rancid-discuss@shrubbery.net > http://www.shrubbery.net/mailman/listinfo/rancid-discuss _______________________________________________ Rancid-discuss mailing list Rancid-discuss@shrubbery.net http://www.shrubbery.net/mailman/listinfo/rancid-discuss