Dan, There was a probem (not R:Base) when Zebra bought Eltron. Zebra created it's own designer drivers that when UPS bought Zebra printers and discovered that the drivers didn't work, UPS threatened to return all of the printers. Zebra recanted and rolled back out the Eltron drivers (the facts may not be as presented).
I am currently using the Zebra TLP2824 printers and drivers with no problems with R:Base. Jan -----Original Message----- From: "Dan Goldberg" <[EMAIL PROTECTED]> To: [email protected] (RBASE-L Mailing List) Date: Wed, 3 Dec 2008 09:29:23 -0800 Subject: [RBASE-L] - RE: Zebra LP2844 printer driver crashing RBase? The version I am using is 1.0.0.35 Dan Goldberg From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of Dan Goldberg Sent: Tuesday, December 02, 2008 4:46 PM To: RBASE-L Mailing List Subject: [RBASE-L] - RE: Zebra LP2844 printer driver crashing RBase? I use two of these printers and have not experienced the issue you had. I had some problems finding a good print driver version. The sticker at the time was zebra but it was still eltron inside. I will post the version of driver I am using tomorrow. Dan Goldberg From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of Kenny Camp Sent: Tuesday, December 02, 2008 10:16 AM To: RBASE-L Mailing List Subject: [RBASE-L] - Zebra LP2844 printer driver crashing RBase? I have a very simple label program I wrote that is used heavily printing hundreds of small print jobs a day (1 to 100 labels at a time). The variable form (and RBase 7.6 compiled app) freezes several times a day. I have tried several different Zebra printer drivers with no improvement. It happens on several different computers and printers and label forms while some labels print with never a (reported) problem, but they are not used as heavily. Has anybody else had problems with this printer or screen freezes when printing? Most of the time the labels print, but focus never returns to the form. Kenny
