John, (from the help)
DirectDraw This property indicates whether the image will be sent directly to the printer or to an intermediate bitmap and then copied to the printer. If you are having difficulty getting an image to print correctly on the printer, try setting this property to True. Jan -----Original Message----- From: "John Engwer" <[email protected]> To: [email protected] (RBASE-L Mailing List) Date: Thu, 11 Jun 2009 18:12:43 -0400 Subject: [RBASE-L] - RE: Black image Jan and Dan, I have the same problem at one of my accounts. It may only happen once or twice per month and I have never been able to find the cause. I just checked and direct draw was not “checked” but it is now. I sure hope that resolves the problem. What does direct draw do ? John From: [email protected] [mailto:[email protected]] On Behalf Of Dan Goldberg Sent: Thursday, June 11, 2009 5:43 PM To: RBASE-L Mailing List Subject: [RBASE-L] - RE: Black image I make sure direct draw is checked on the image. Then the image prints fine. Dan Goldberg From: [email protected] [mailto:[email protected]] On Behalf Of jan johansen Sent: Thursday, June 11, 2009 2:14 PM To: RBASE-L Mailing List Subject: [RBASE-L] - Black image Group, I seem to remember a discussion about this a while back but I don't have access to my archive. I have an image on a report. Ocassionally this image will print as a dark blotch. So there may be 35 pages that print fine, 2 with a dark spot, 15 fine, 3 with dark spot, etc. This image has the following properties; Center MaintainAspectRatio Stretch Any ideas appreciated. Jan
