Tom, I need the 2 subreports as these are on the 2nd and third part of a 3 part laser check. 1st part is the check. 2nd and 3rd part are check details that have to be the same. The 2nd part goes with the first part to the recipient. The third part is kept by the payor.
Thanks for the idea but I don't think it would work for this purpose. Bill Eyring -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Tom Frederick Sent: Tuesday, August 11, 2009 4:50 PM To: RBASE-L Mailing List Subject: [RBASE-L] - RE: Sub-Report Question Do you need the subs for a particular reason? What if you skipped the sub approach entirely and simply used a memo in a region w/ stretch and Shift relative for the second region. Tom Frederick Elm City Center 1314 W Walnut Jacksonville, IL 62650 O - 217-245-9504 F- 217-245-2350 Email - [email protected] -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Bill Eyring Sent: Tuesday, August 11, 2009 3:06 PM To: RBASE-L Mailing List Subject: [RBASE-L] - RE: Sub-Report Question Tom, I had done just that last night. Both regions are set to stretch. The 2nd region wraps to the 2nd column as expected. However the 1st region goes to the end of the first column and does not wrap to the 2nd column. I tried setting stretch off and expanding the subreport height to the full height in 1st region with the same incorrect results. Maybe Buddy is right that the 1st sub-report will push down into the 2nd sub-report. Time for my thinking cap. Thanks. Bill Eyring -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Tom Frederick Sent: Tuesday, August 11, 2009 9:16 AM To: RBASE-L Mailing List Subject: [RBASE-L] - RE: Sub-Report Question Bill, Can you put a sub inside a region, then place the regions where you want them, and let them stretch? Tom Frederick Elm City Center 1314 W Walnut Jacksonville, IL 62650 O - 217-245-9504 F- 217-245-2350 Email - [email protected] -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Bill Eyring Sent: Monday, August 10, 2009 6:05 PM To: RBASE-L Mailing List Subject: [RBASE-L] - Sub-Report Question I have a report (3 part check) where I need to put the same sub-report (subReport1 and SubReport2) in the 2nd part of the check and the 3rd part of the check. Each sub-report is set to print 2 columns each 3.88" wide. The purpose is to wrap the remittance advice line items when they reach the bottom of each check part so I get 2 columns of remittance items. I can get the 2nd subreport to wrap but can't get the 1st subreport to wrap, it just pushed the 2nd subreport down further. Any ideas of how I can fix this ? Thanks in advance. Bill Eyring
