Bruce Good idea, but I was able to do it with permanent tables(See my email Sub-Report Question Solved !). Thanks for the advice. Appreciate it.
Bill -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Bruce Chitiea Sent: Wednesday, August 12, 2009 9:18 AM To: RBASE-L Mailing List Subject: [RBASE-L] - RE: Sub-Report Question > Each sub-report works off the same table and contains identical > information Bill: How about individual, identical temporary tables for each of Stub-2 and Stub-3? Same information but each formats to the page separately. Does that even make sense? (newbie here) bruce/safesectors > -------- Original Message -------- > Subject: [RBASE-L] - RE: Sub-Report Question > From: "Bill Eyring" <[email protected]> > Date: Tue, August 11, 2009 3:59 pm > To: [email protected] (RBASE-L Mailing List) > > > Emmitt, > > I don't need the sub-reports side by side. I need one each on the 2nd > and third part of a 3 part check. > My application has to provide 30 lines of detail for each subreport. > The way I thought I could accomplish this was to put a sub-report on > the 2nd part and a sub-report on the 3rd part. Each subreport was > setup for 2 columns so I could fit these details in a space approximately 3" high by 7" wide. > > Each sub-report works off the same table and contains identical information. > > So far, the 2nd subreport wraps to the top of the 2nd column as > expected, but the 1st subreport stops at the end of the 1st column and > will not wrap to the top of the second column. I need both subreports > to print exactly the same for the space available. > > Thanks for the idea. I'll keep on truckin. > > Bill > > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On Behalf Of Emmitt > Dove > Sent: Tuesday, August 11, 2009 5:06 PM > To: RBASE-L Mailing List > Subject: [RBASE-L] - RE: Sub-Report Question > > Bill, > > Have you tried a sub-report inside a sub-report approach to get them > side-by-side? > > Emmitt Dove > Manager, Converting Applications Development Evergreen Packaging, Inc. > [email protected] > (203) 214-5683 m > (203) 643-8022 o > (203) 643-8086 f > [email protected] > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On Behalf Of Bill > Eyring > Sent: Tuesday, August 11, 2009 4:06 PM > To: RBASE-L Mailing List > Subject: [RBASE-L] - RE: Sub-Report Question > > Tom, > > I had done just that last night. Both regions are set to stretch. The > 2nd region wraps to the 2nd column as expected. However the 1st region > goes to the end of the first column and does not wrap to the 2nd column. > > I tried setting stretch off and expanding the subreport height to the > full height in 1st region with the same incorrect results. Maybe Buddy > is right that the 1st sub-report will push down into the 2nd sub-report. > > Time for my thinking cap. Thanks. > > Bill Eyring > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On Behalf Of Tom > Frederick > Sent: Tuesday, August 11, 2009 9:16 AM > To: RBASE-L Mailing List > Subject: [RBASE-L] - RE: Sub-Report Question > > Bill, > Can you put a sub inside a region, then place the regions where you > want them, and let them stretch? > > Tom Frederick > Elm City Center > 1314 W Walnut > Jacksonville, IL 62650 > O - 217-245-9504 > F- 217-245-2350 > Email - [email protected] > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On Behalf Of Bill > Eyring > Sent: Monday, August 10, 2009 6:05 PM > To: RBASE-L Mailing List > Subject: [RBASE-L] - Sub-Report Question > > I have a report (3 part check) where I need to put the same sub-report > (subReport1 and SubReport2) in the 2nd part of the check and the 3rd > part of the check. > > Each sub-report is set to print 2 columns each 3.88" wide. The purpose > is to wrap the remittance advice line items when they reach the bottom > of each check part so I get 2 columns of remittance items. > > I can get the 2nd subreport to wrap but can't get the 1st subreport to > wrap, it just pushed the 2nd subreport down further. > > Any ideas of how I can fix this ? > > Thanks in advance. > > Bill Eyring --- RBASE-L =======================3D======================= D= TO POST A MESSAGE TO ALL MEMBERS: Send a plain text email to [email protected] (Don't use any of these words as your Subject: INTRO, SUBSCRIBE, UNSUBSCRIBE, SEARCH, REMOVE, SUSPEND, RESUME, DIGEST, RESEND, HELP) =======================3D======================= D= TO SEE MESSAGE POSTING GUIDELINES: Send a plain text email to [email protected] In the message SUBJECT, put just one word: INTRO =======================3D======================= D= TO UNSUBSCRIBE: Send a plain text email to [email protected] In the message SUBJECT, put just one word: UNSUBSCRIBE =======================3D======================= D= TO SEARCH ARCHIVES: Send a plain text email to [email protected] In the message SUBJECT, put just one word: SEARCH-n (where n is the number of days). In the message body, place any text to search for. =======================3D======================= D=
