Angelo, Are you opening and closing the forms each cycle?
If so, you might want to use three variable forms, keeping all three open as MDI forms and manage them with their visible properties. Dennis McGrath Software Developer QMI Security Solutions 1661 Glenlake Ave Itasca IL 60143 630-980-8461 [email protected] From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Wednesday, June 06, 2012 9:28 AM To: RBASE-L Mailing List Subject: [RBASE-L] - Re: Error Messages. Dan Regarding my "RBase" powerpoint, procedure is running on a stand alone pc. Three forms, each for five seconds, approximately 240 revolutions per hour. Right after approximately (three hours) 660 revolutions it locks up. Restart the computer, restart the procedure and again right after approximately (three hours) 660 revolutions it again locks up? ? Thanks for your input, I guess I'll use "real" power point. Angelo ________________________________ From: [email protected]<mailto:[email protected]> To: [email protected]<mailto:[email protected]> Subject: [RBASE-L] - Re: Error Messages. Date: Mon, 4 Jun 2012 13:26:21 -0700 Is it running from the network? If so, it could be connectivity issues. I would check you network card, computer power saving features. Dan From: [email protected]<mailto:[email protected]> Sent: Monday, June 04, 2012 9:56 AM To: RBASE-L Mailing List<mailto:[email protected]> Subject: [RBASE-L] - Error Messages. Hello all, I through together a quick three form procedure that just keeps repeating for customer information. My RBase version of powerpoint. After a period time the system locks up with the following two error messages. 1. Access violation at address xxxxxxxx in module RPG75.exe. Write of address xxxxxxxx. 2. Read violation of address xxxxxxxx. Read of address xxxxxxxx. Any suggestions to eliminate these errors. Regards, Angelo
