[RBG7-L] - Re: SEARCH dymo labels

Thomas Eldred Thu, 21 Apr 2005 08:11:16 -0700

OK,

thank you Scott and Razzak for your input on this matter... The labels now print one at a time, but how do i rotate my variables so that they print correctly on the form?

My variables are ok, in that they appear in multiple other reports and labels--but here are my results.

With label settings in RB7 set to portrait & printer set to landscape, Data displays correctly, but i get one inch of three labels printing per label With RB7 set to portrait and printer set to portrait, I get the same results.**see example below

With RB7 set to landscape & printer set to landscape, I get no data displayed in designer, preview or print.

I hope the simple solution is that i am retarded and missing something obvious.

thank you
tom

** 3 labels per page example

| your nam|
| your add|
| your city|
|              |
| next nam|
| next add|
| next city|
|              |
| next  nam|
| next add|
| next city|
|              |

----- Original Message ----- From: "A. Razzak Memon" <[EMAIL PROTECTED]> To: "RBG7-L Mailing List" <[email protected]> Sent: Friday, April 08, 2005 9:05 AM Subject: [RBG7-L] - Re: SEARCH dymo labels

At 08:50 AM 4/8/2005, Thomas Eldred wrote:

Good morning and my apologies if this posts--trying to look for
instructions on making the Dymo Label maker to work with RBASE.
...I know i saw this posted.


Tom,

Here you go ...

To print one label at a time on roll, you would need a printer to
support labels on a roll, such as DYMO LabelWriter 330 Turbo-USB.

If that is the case, then, first you need to setup the printer
and then use the "Custom" Paper Size option of Label > Page Setup.

Here are a few tips (based on my experience using Dymo LabelWriter
with "R:Capture", the first vertical market RBG7 application):
http://www.rcapture.com

01. By default, the Dymo Label Printer is installed for "Portrait"
    Printing. You need to change the printer default to print as
    "Landscape".

    Here's how:

    If installed properly on Windows 2000/XP Workstation, you
    should be able to see the DYMO LabelWriter 330 Turbo-USB as
    one of the listed printer in Windows Printer Configuration
    Panel.

    Start | Settings | Printers

    You'll need to update the Printing Preferences of DYMO
    LabelWriter 330 Tubo-USB printer as following:

    01. Right-Click on DYMO LabelWriter 330 Tubo-USB printer icon
    02. Select Printing Preferences...
    03. Change Orientation to Landscape
    04. Click on [Advanced] button for Advanced Properties
    05. Change the properties as following:
        Paper Size: 99014 Shipping
        Copy Count: 1 Copy
        Advanced Printing Features: Enabled
        Halftoning: Super Cell
        Printer Quality: Barcodes and Graphics
        Print Quality: Normal

        Click on [OK] when done

    06. Click on [Apply] button to save and then click on [OK]
        to save Printing Preferences.

02. Once the printer is setup accordingly, now you can use the
    R:BASE 7.1 for Windows Labels to print one label at a time
    on a roll!

03. Use "Custom" option to set the height and width of label.

That's all there is to it.

Enjoy and make sure to have fun!

Very Best R:egards,

Razzak.

[RBG7-L] - Re: SEARCH dymo labels

Reply via email to