John, Albert, Razzak, Thank you for your responses, but -- Net use does not show any printers In reports, default is the printer setting. Any other ideas?
Bernie Lis
----- Original Message ----- From: "John" <[EMAIL PROTECTED]>
To: "RBG7-L Mailing List" <[email protected]>
Sent: Thursday, May 05, 2005 8:12 PM
Subject: [RBG7-L] - RE: Wrong printer is printing
Bernie,
LPT1 could be captured to the network printer, or redirected by a "net use"
command. If you are using XPP and go to the CMD prompt and type net use you
will see any printers that are being redirected, or alternatively check the
login script. Try printing to LPT1 from the command prompt and see where the
printing ends up.
Regards
John Docherty
-----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of Bernard Lis Sent: Friday, 6 May 2005 11:42 a.m. To: RBG7-L Mailing List Subject: [RBG7-L] - Wrong printer is printing
Customer got a new Okidata ML 420 and connected it to the parallel port. The default printer is an HP LaserJet via the network.
The program does Prnsetup and the print box comes up showing all available
printers.
The Okidata is selected but the print goes to the HP? So what could be going on here?
Bernie Lis
