I have seen reports that XP Home does not handle neetworking very well. --- John Engwer <[EMAIL PROTECTED]> wrote:
> I have a client that complains of the same problem. They told me that if > they re-boot the PC where the report was initiated, the problem disappears. > It happens randomly on three of the five PCs that are used heavily. I have > never been on site when the problem occurred but they showed me the results. > All three of the machines that fail have XP Home OS and 512 meg of memory. > > They never turn their PCs off so I asked them to reboot all of the PCs every > Monday morning. They have done this for the past three weeks and have had > no failures. Two weeks is the longest they had gone without seeing the > problem before they started the Monday reboot procedure. > > John > -----Original Message----- > From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of Lawrence > Lustig > Sent: Tuesday, June 07, 2005 4:29 PM > To: RBG7-L Mailing List > Subject: [RBG7-L] - Logo blacks out on report. > > I'm continuing to receive reports from a number of clients about R:Base > sometimes printing a logo on a report as a solid black square. > > This happens unpredicatably. Sometimes the report prints fine, very > occasionally it is wrong. > > In addition, I've just been shown an example of a watermark (printed using > the > angle label in the page style band of a report) that normall appears in a > light > gray color (set using the font color drop down on the report toolbar) > occasionally printing in full black -- thus obscuring part of the report. > > Does anyone have any insight? > -- > Larry > > Albert Berry Management Consultant RR2 - 1252 Ponderosa Drive Sparwood BC, V0B 2G2 Canada (250) 425-5806 (250) 425-7259 (708) 575-3952 (fax) [EMAIL PROTECTED]
