Michael -

Thanks for the photos.  I hadn't known you were cantilevered.  Great
bike BTW.  What has Hiroshi had to say about the fenders?  I have to
be careful not to bring my credit cards with me when I go to his
shop.  Very nice frames.

Phil B



On Jun 24, 9:15 am, MichaelH <[email protected]> wrote:
> This bike has canti brakes and a bottom threaded seat stay bridge, you
> can kind of see it in the last picture in this 
> set:http://gallery.me.com/mhechmer#100029
>
> Since the crack is still quite small I have been thinking along the
> lines that John suggested, using either a small steel bracket on
> either side  of the hole, or perhaps cutting a section out of the
> original fender.  In either case I'll try Gorilla glue to avoid making
> any additional holes in the fender.
>
> My daughter is getting married on Saturday, so this might not happen
> right away.
>
> Thanks for the suggestions,
> Michael
>
> On Jun 24, 11:15 am, Phil B <[email protected]> wrote:
>
> > Michael -
>
> > I am unsure of the setup on your bike.  Is the bridge threaded for the
> > mounting bolt?  Being on the seat stays, does the rear brake mount to
> > the same bridge?
>
> > I've had good results using rubber washers on both sides of the fender
> > with an additional metal washer on the inside of the fender under the
> > nut.  I also setup my honjos with tension, as in no possibility of
> > rattleing.  But, I run fenders for only 4 months a year and don't
> > generally ride a lot of jaw dropping bumpy surfaces.
>
> > Phil B
>
> > > On Jun 23, 6:56 pm, MichaelH <[email protected]> wrote:
>
> > > > I noticed some unusual rattling from my rear Honjo fender today, and a
> > > > close inspection revealed a crack at the seat stay bridge attachment.
> > > > This one threads directly into the bridge.  
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to 
[email protected]
For more options, visit this group at 
http://groups.google.com/group/rbw-owners-bunch?hl=en
-~----------~----~----~----~------~----~------~--~---

Reply via email to