On Thu, Oct 9, 2014 at 10:20 AM, lungimsam <john11.2...@gmail.com> wrote:
> 1. What's your experience? > Nitto mini on a canti-Rom for about a year. > 2. Do P-clamps slide down over time? > No sliding. I clamped directly to the fork, and the rubber pads did discolor the paint slightly. If I did it again, I'd use tape under the clamps (bar tape or electrical or maybe fancy "helicopter" tape). 3. Where's the best place on the fork for clamping, or does it matter? I > guess I could measure my Sam fork braze-ons and model it from there. > If you're using a fixed leg rack like the mini, then the rack will determine that. Otherwise, you want to avoid getting down to the quick-tapering part (since the clamps might theoretically be more likely to slip). I would probably have loads of 4 to 8 lbs. maximum. > I am probably over-thinking this? > I carried up to 25lb in a basket zip tied to my mini with no problem. Best, joe broach portland, or -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.