Thanks Doug. I have read the insert and searched the internet and never found for sure if you need to remove the Loctite each time, or if it keeps tight as it needs with a few on/off of the bolt. My instincts tell me you are correct. I have only removed it and reapplied twice in the past 5 years on my most used Hillborne.
Tony On Sunday, December 6, 2015 at 3:40:05 PM UTC-8, dougP wrote: > The big box guys are pretty spotty on quality metric fasteners. In my > area, Ace Hardware has an excellent selection in various heads (hex, Allen, > etc.) and stainless. Another possible might be a marine hardware as > stainless is preferred around boats. For rack bolts, use blue Loctite. > Brake mfgs apply it to their bolts at the factory & it survives a few > cycles of install & remove. > > dougP > > On Sunday, December 6, 2015 at 2:18:34 PM UTC-8, Jason Braaten wrote: >> >> Hi All, >> >> I'm mounting a Nitto m32 front rack to my Hunqapillar. Where to buy the >> screws and what size For the side mounts on the fork? I'm hoping I can >> pick up at my local hardware store / Home depot. Thanks in advance. >> >> Jason >> >> -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
