On Wednesday, November 23, 2016 at 12:42:19 PM UTC-8, Brewster Fong wrote: > > > > On Wednesday, November 23, 2016 at 7:32:25 AM UTC-8, Belopsky wrote: >> >> ooooo..Ashwath looks like you got some reading to do! >> >> Shimano wont work with Campy. I think there are ways to go about it where >> it does, but basically just don't. I think you need special cables as well >> for Campy bits? >> >> Rear is 130mm. There are many hubs that support Campy, but they have to >> be Campy specific.. Are you building your own wheels? >> > > One option is to replace the Campy freehub body with one designed for > Shimano cassettes. Not sure if it works with a Veloce rear hub, but for > the Record/Chorus/Centaur with the oversized axle, but there are a couple > of options: > > For standard 17mm axle, you will probably need this one: > > > http://www.totalcycling.com/en/Campagnolo-Freehub-Body-For-Shimano-891011-Speed---R1137139-17mm-alloy-axle/m-19018.aspx > > For 9mm axle, it might be this one: > > > http://www.totalcycling.com/en/Campagnolo-Freehub-Body-For-Shimano-8910-Speed---R1134955-9mm-Steel-Axle/m-19019.aspx > > You should verify which one will work with your specific hub if > interested. Good Luck! >
Apparently, there's also a Campy freehub body for shimano 8/9/10 cassette for a 12mm axle too: http://www.totalcycling.com/en/Campagnolo-Freehub-Body-For-Shimano-8-9-10sp-With-12mm-Axle/m-22417.aspx Just need to figure out what size axle you have! -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
