This is probably the most “woman” answer ever...but what if I heated the metal with my hair dryer? Think it would bend much more agreeably?
Sent from my iPhone > On Mar 19, 2020, at 12:42 PM, Steve Palincsar <palin...@his.com> wrote: > > > It's flat, and to work it needs to wrap over and around a curved fender. > > The orientation is obvious: the tab with the hole has to line up with the > hole in the bridge. > > So how would you do that? > > Afraid to mess with the metal? Trace it and cut yourself out one of stiff > paper. Now make believe it's paper dolls. Put it on the fender and what > would you have to do for it to wrap over the fender and stay there? > > Now do it with the metal. > > On 3/19/20 1:45 PM, Leah Peterson wrote: >> My fender parts arrived from VO. >> >> I’m not usually very brave about attempting mechanical fixes myself. But in >> these trying (sheltering in place) times where one does not have access to a >> bike shop, I am finding myself becoming a bit braver. It is disconcerting to >> see this one-fendered Clem and I’m motivated to get it fixed. >> >> Would you all be greatly annoyed if I solicited advice on how to do this >> myself here? If not, see the attached video. (Likely the first in a >> series.😬) I’ll download the instructions as well, and try to figure it out. >> I don’t feel very confident about my capabilities and I don’t want to do >> anything wrong and risk being killed on my bike by a wiggly fender. >> > -- > Steve Palincsar > Alexandria, Virginia > USA > -- > You received this message because you are subscribed to a topic in the Google > Groups "RBW Owners Bunch" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/rbw-owners-bunch/qyBurHHhVnE/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > rbw-owners-bunch+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/rbw-owners-bunch/3f98a0fd-6f57-ff77-7a1d-64f5c60f1ee7%40his.com. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/EDCEA414-43C5-43DD-9470-6323D840D888%40gmail.com.
