Why are so many opposed to using a simple wrench on a nut as Nitto intended for this model stem?
A guy who likes using the correct tool for the job. Laing On Wednesday, June 17, 2020 at 1:47:44 PM UTC-4, Doug Hansford wrote: > I agree with you aeroperf, there is nothing for the nut to "grab" when > tightened down. A star washer or split/lock washer should help. > Doug > > On Wednesday, June 17, 2020 at 1:44:40 PM UTC-4, aeroperf wrote: >> >> >> When Leah posted about buying her stem, I went out and got one, too (and >> within a week of her posting). >> Here’s the photo of mine - still in the plastic bag (because I’m going to >> re-sell it and I wanted it pristine. >> As you can see, it’s a hex nut. >> If I were going to install mine, I would remove the nut entirely and put >> a star washer under it, then hold it with a wrench to tighten. >> >> -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/d69e7dc5-31a4-4583-8504-f6a8956efafao%40googlegroups.com.
