I recall reading on Peter White's site that you should be careful mixing velogical dynos with certain lights depending on their requirements. He specifically mentioned the Edelux and Edelux II as being ones you *shouldn't use with velogical, or other experimental dyno generators.
On Tuesday, July 26, 2022 at 11:51:06 AM UTC-4 jkg...@gmail.com wrote: > Thanks, everyone, for your informative responses. As Eric said, lots to > think about. > > Intrigued by the Velogical dynamo for my homer, since I have a wheelset > for it already. Since I need to build wheels for the Atlantis, I have a > sense that the dyno hub might make more sense, although I gather that > there's a case to be made that there's still a case to be made for the > Velogical in that case too -- just spent a few minutes on their website, > and it looks like an interesting product. Again, lots to consider. > > > > On Tuesday, July 26, 2022 at 8:19:02 AM UTC-7 campyo...@me.com wrote: > >> Jason: >> >> You’ll hear many opinions—good luck sifting through the advice you will >> get! >> >> I have both SON and Shutter Precision hubs and have not had any issues >> with either. My SONs have ranged from the old-style type with flanges >> pressed onto a center piece to the modern (and very pretty) type. I have >> several variations of the SP hubs on various bikes. >> >> If money is no object, definitely go with SON, if only because they’re so >> darn pretty. SP will perform just as well—I have not experienced the >> “roughness” that one other respondent reported. >> >> Based on what I’ve read about SON and their weather sealing, the biggest >> advantage that I know of is that they are pressure compensated; SP hubs are >> not. That means that if you go from a warm, dry environment directly into a >> cold and dry one, the SON hubs won’t draw in moisture as the air inside the >> hub cools. SP hubs might, but for this to be a problem, you would have to >> roll right out into a cold downpour. That’s an edge case for me and >> something that has never been a problem. >> >> Finally … Have you considered the Velogical dynamo? I have one on an Alex >> Singer, and it’s great. Pros: Cheaper than a dyno hub and wheel, very low >> draw, ZERO drag in the “off” position, great German engineering, works with >> any wheel. Cons: Sits outside on the frame, where it might be subject to >> damage (not a problem for me in several years of use), makes a quiet >> whirring noise when running, requires a small clamp to attach to the frame. >> >> --Eric Norris >> campyo...@me.com >> Insta: @CampyOnlyGuy >> YouTube: YouTube.com/CampyOnlyGuy >> >> On Jul 25, 2022, at 11:59 PM, Jason Glenn <jkg...@gmail.com> wrote: >> >> Hi, all, >> >> I've never had a bike with a dyno hub but rode one a few months back -- >> thanks, Max! -- and have decided to build up a wheel -- my first wheel >> build, too -- with one for an Atlantis. I know the Son 28 is the go to, >> and I could be convinced to use one, but I'm working on a limited budget >> and am wondering what people think about the alternatives out there. My >> main use for the Atlantis, at least at the moment, will be commuting, >> running erands, etc., but I'm trying to bike as my principle form of >> transportation (in Los Angeles) and will be riding in the evenings and >> early mornings with some regularity. Down the road, I would like to do >> some touring on it. >> >> Anyway, I'm interested in any and all suggestions/perspectives. >> >> Thanks, in advance, >> jason >> >> P.s. While I'm at it, happy to hear about favorite rims and spokes for >> the build... >> >> -- >> You received this message because you are subscribed to the Google Groups >> "RBW Owners Bunch" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to rbw-owners-bun...@googlegroups.com. >> >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/rbw-owners-bunch/a069839b-49c0-4e8f-bfb5-000f0ee9255cn%40googlegroups.com >> >> <https://groups.google.com/d/msgid/rbw-owners-bunch/a069839b-49c0-4e8f-bfb5-000f0ee9255cn%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> >> >> -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/04e8a897-c495-48bd-b10a-a4f570f9d16dn%40googlegroups.com.
