Doug:
Chew on these...
https://www.parktool.com/en-us/blog/repair-help/front-derailleur-adjustment
https://si.shimano.com/en/#/en/search/Series?name=XTR&generation=Archive&type=MTB
On the Shimano site do some surfing around to find your FD model Service
Instructions.
Bon appetit,
Scott
On Saturday, December 3, 2022 at 01:34:39 PM MST, Doug H.
<dhansford1...@gmail.com> wrote:
That would be great. Thank you. I know it should be easy! And, if I learn to
read instructions that would be most helpful. ;)Doug
On Saturday, December 3, 2022 at 3:24:21 PM UTC-5 rmro...@gmail.com wrote:
I recently replaced the Deore on my Clem with a nearly identical XTR. Only did
so because it was cheap @ a tubeless tire explosion coated the Deore with
sealant. That stuff just will not come off!A way I had never installed / tuned
one before. The supplied instructions were very helpful - it was a cinch! If I
can find those instruction I will see if I can forward some pics. In the
meantime, I think Shimano provides access to these very same instructions on
line.
Sent from my iPhone
On Dec 3, 2022, at 2:41 PM, Doug H. <dhansf...@gmail.com> wrote:
I want to tap into the collective knowledge here. I need to adjust my Shimano
Deore front derailer on my Clem. It looks to be aligned properly. Is it proper
to tighten the cable when the chain is on the small ring and largest rear cog?
Should the H and L screws be all the way screwed in when I start the
adjustment? I was able to get it to shift but the low screw is pretty much all
the way out so it just seems to be off in some way. And, after a couple of
rides it seems to come back out of adjustment. Any advice would be most
appreciated. Doug
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-bun...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/rbw-owners-bunch/1faff1d8-a50b-406b-9398-d29af132187cn%40googlegroups.com.
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/rbw-owners-bunch/2fa695ee-c562-44ce-a664-59f2f281ae9en%40googlegroups.com.
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/rbw-owners-bunch/1145778442.642211.1670101234657%40mail.yahoo.com.
