Richard,
Thanks for starting this thread.
I'm building a Gus, too, and judging by how looooong the steerer tube is
unmounted I think it's likely I'll cut mine down to a more desirable length.
When I make the steerer cut, I'm going to leave enough minimum length above
headset stack to allow for use of a stem style like this Discord Chromo Peeper
. This style stem would be a great way to regain bar height, if needed, after
cutting steerer.
|
|
|
| | |
|
|
|
| |
Discord Chromo Peeper
Discord stems have a theme: short reach, lots of stack. We’re obsessed, an
obsession that transcends trends. Tre...
|
|
|
Scott
On Tuesday, January 17, 2023 at 05:01:05 AM MST, Richard Rose
<rmros...@gmail.com> wrote:
Thanks folks. You all have confirmed my own thoughts.
Sent from my iPhone
On Jan 16, 2023, at 11:25 PM, Joe Bernard <joerem...@gmail.com> wrote:
Ed's solution is probably a good guideline. I would add to not be in a hurry
to cut it, you may ride it for a while and realize Boscos aren't your thing and
will need extra steerer for a lower bar. I would put a bunch of spacers on top
and let it be weird for a couple months!
On Monday, January 16, 2023 at 7:40:41 PM UTC-8 rmro...@gmail.com wrote:
Perhaps a question for Gus owners only? Is there a consensus on cutting down
steering tubes? My Bosco bar will arrive in a day or two & I anticipate I will
end up with a lot of extra steerer. How much is too much above the stem once
the fit is dialed in? Not just an aesthetic issue but a practical one as well.
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/rbw-owners-bunch/b12034a5-9fd9-4b79-b608-ba714911d35dn%40googlegroups.com.
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/rbw-owners-bunch/358C6341-F282-4BA2-90AC-76EA075E5568%40gmail.com.
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/rbw-owners-bunch/2032527060.2550676.1674055428924%40mail.yahoo.com.
