Alternatively, I may rebuild the clem in a lesser spec than how it's built now, but it will still be a considered overbuilt compared to the clem completes that Riv is selling out of the box.
On Monday, March 11, 2024 at 4:49:28 PM UTC-4 NYCbikeguy wrote: > I'll definitely be parting out most of the components that are > transferrable, but I will most likely bundle up the wheelset (Deore hubs, > Ryde Andra40 650b's) since I don't have a need for 650b wheelsets for the > foreseeable future. I have a ton of goodies that I *can* include as an a > la carte deal, but the base sale will include a rolling chassis. I have a > chris king headset on the clem, so this will be considered in the price. > You guys are the first to hear about this soon-to-go-on-sale Clem! but I'm > definitely going to snap all the pics I can for the photo gallery Riv is > building on the site before this frame leaves me. > > On Monday, March 11, 2024 at 4:36:27 PM UTC-4 [email protected] wrote: > >> Will you be selling the Clem complete or stealing some of the components >> for the Gus. I am pretty sure you will not regret this decision.:) If it >> helps; my 52 Clem has 580 wide Bosco’s with a 135mm FacePlater. I built the >> 57 Gus with the same Bosco but a 90mm Nitto V-5 stem. That put both >> handlebars in pretty much the exact same position relative to my saddle @ >> 72-73cm height. I have since changed the cockpit on the Gus to a Hope >> Cyclery “Albacore” bar paired with a 35mm Paul Boxcar. This has proved to >> be a better singletrack setup for me while remaining just as comfortable. I >> love both bikes.:) >> Sent from my iPhone >> >> On Mar 11, 2024, at 4:19 PM, NYCbikeguy <[email protected]> wrote: >> >> Thanks, everyone! >> >> I feel like my decision to upgrade is cemented from the mere facts that >> the Gus is fillet brazed (ie. stronger frame), has less tail wobble (I've >> noticed this on the clem, but didn't think much of it in the past), and the >> unique feature that this is one of the very few Riv frames that are 1 1/8 >> threadless. in 2019, I went 5 day tour on a Miyata 1000 to Japan, fully >> loaded, and have experienced the torquing of the handlebars in common nitto >> quill stems, as well as the torquing of the quill in the headtube. I can >> totally see this issue being eliminated with a threadless 1 1/8 system. I >> guess one of my lingering concerns is the overall length of the bike, since >> I'm going from a 52 clem (650b) to a 57 gus (700c). I've already had a hard >> time bringing the clem up the elevator to my workplace... the Gus may not >> even make it in there, and i'd have to resort to using the service elevator >> each and every time. Anyway, that's a minor concern compared to the points >> everyone mentioned, so that's the least of my worries. >> >> With that said, I guess my 52 Clem L in RBW blue will be going up for >> sale in a few weeks! >> I'm in the NYC tristate area. I don't plan on shipping because this is an >> abnormally long frame to ship. >> Looking forward to hearing from you all. >> Also, Thanks for all the help and wisdom! >> >> Best, >> IY >> >> On Sunday, March 10, 2024 at 11:30:54 AM UTC-4 Joe Bernard wrote: >> >>> Bill brings up a detail I skipped over in my answer: keeping both. My >>> Sparkle Blue Used-To-Be-Leah's Clem L is a perfect shopper/cruiser I plan >>> to hit the trails with when this rain stops. I'd love to find a Gus for the >>> trails but I'm not giving up my Clem! >>> >>> Joe Bernard >>> >>> On Sunday, March 10, 2024 at 8:06:27 AM UTC-7 Bill Lindsay wrote: >>> >>>> I say go for it! They are very different bikes, so as usual, I could >>>> justify keeping both. If I had both and was asked to get rid of one and >>>> retain the other, I could easily see myself keeping the Gus. I think the >>>> Gus would do a better job impersonating the Clem than the Clem would do >>>> impersonating Gus. >>>> >>>> Bill Lindsay >>>> El Cerrito, CA >>>> >>>> On Saturday, March 9, 2024 at 9:34:49 AM UTC-8 NYCbikeguy wrote: >>>> >>>>> Regardless of the price/value of each frame, what do all of you think >>>>> are the pros and cons of either bikes? overlaps vs. differences? >>>>> Ultimately, which would you choose to keep? >>>>> >>>>> FYI, I tend to over-build my bikes and I enjoy riding them, so any >>>>> comments alluding to "that's too much bike" will be disregarded. >>>>> >>>>> Thanks, >>>>> IY >>>>> [image: IMG_8169.JPG] >>>>> >>>> -- >> >> You received this message because you are subscribed to the Google Groups >> "RBW Owners Bunch" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/rbw-owners-bunch/2bbea848-8533-4db1-98a0-a1f869ef76den%40googlegroups.com >> >> <https://groups.google.com/d/msgid/rbw-owners-bunch/2bbea848-8533-4db1-98a0-a1f869ef76den%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> >> -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/bd1f1ce7-2d9f-4fe3-9ef2-94c5f08d49e0n%40googlegroups.com.
