Eric and Tim --No. both pads appeared to have equal wear. In fact, there was a 
small  piece of metal embedded in the left side pad.  The side-pull brakes are  
relatively unused, new for just a few months. The wheels came from  another 
bike 
that was canti-equipped. I just took the front wheel apart, as well. I'm 
tossing 
that set of rims for good.



________________________________
From: EricP <[email protected]>
To: RBW Owners Bunch <[email protected]>
Sent: Tue, December 6, 2011 5:22:04 PM
Subject: [RBW] Re: Near-Catastrophic Rim Failure

Ray,

Yeah, that sidewall looks pretty thin.  Oddly enough, on the photo
with the white paper back, the inside of the rim looks thin, not just
the outside.  Especially below the bead on the section pointed up.

Patrick - am one that prefers bike stuff overbuilt, not under.  Have
had to learn over many years that heavy duty for some is normal to
light for me.  Always has worked that way.  Not abusive, just fat.
And well outside the norms for the average bike designer.  Will fess
up that my single speed is pushing the limits with 32h front and
rear.  Am hopeful of reliability, but won't be surprised if it isn't.

Eric Platt
St. Paul, MN



On Dec 6, 3:21 pm, Ray Shine <[email protected]> wrote:
> This will be the last time I come to this well over this issue, but here are 3
> more pix of the failed rim sawn in cross-section. Pretty alarming!  Look here:
>
> http://www.flickr.com/photos/8581354@N03/sets/72157628310179371/with/...
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to 
[email protected].
For more options, visit this group at 
http://groups.google.com/group/rbw-owners-bunch?hl=en.

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to 
[email protected].
For more options, visit this group at 
http://groups.google.com/group/rbw-owners-bunch?hl=en.

Reply via email to