On Aug 11, 10:57 pm, Derek Engelhaupt <[email protected]> wrote: > The one I would build if I built one would be the most square > turret which is the Saladin FSV turret variant of the Aussie > Army. Did you already have a turret constructed Joe? Heck > yeah I'd be interested. I have a suitable turret rotate > mechanism and an extra CS-80 servo for the elevate. I wonder > if the GT2000 marker you sold me a while back would be small > enough to fit inside?
I built a six-wheel skid-steer solid-axle aluminum Saladin hull with two M01 motors but it got shanghaied into my office for a research project. I also built a generic turret rotate/elevate system with a Saladin turret floor but I did not complete the magazine or turret body after the hull was kidnapped. It should be compatible with a GT2000 marker. It mounts flush to a flat deck and may have enough room for a small battery to allow self-contained operation using a second radio Rx without an umbilical. I will dig it out and snap some photos. Joe --~--~---------~--~----~------------~-------~--~----~ You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat -~----------~----~----~----~------~----~------~--~---
