Video of the first run of this vehicle is uploading to Youtube as I write this. It's at about 60MB of 497MB so it will still be a little while before it's viewable. Vid is around 6 minutes. I'll post the link when it's finished.
Derek On Wed, Aug 12, 2009 at 6:24 AM, Joe Sommer <[email protected]> wrote: > > > On Aug 11, 10:57 pm, Derek Engelhaupt <[email protected]> wrote: > > The one I would build if I built one would be the most square > > turret which is the Saladin FSV turret variant of the Aussie > > Army. Did you already have a turret constructed Joe? Heck > > yeah I'd be interested. I have a suitable turret rotate > > mechanism and an extra CS-80 servo for the elevate. I wonder > > if the GT2000 marker you sold me a while back would be small > > enough to fit inside? > > I built a six-wheel skid-steer solid-axle aluminum Saladin > hull with two M01 motors but it got shanghaied into my office > for a research project. I also built a generic turret > rotate/elevate system with a Saladin turret floor but I did > not complete the magazine or turret body after the hull > was kidnapped. It should be compatible with a GT2000 marker. > It mounts flush to a flat deck and may have enough room > for a small battery to allow self-contained operation > using a second radio Rx without an umbilical. > > I will dig it out and snap some photos. > > Joe > > > --~--~---------~--~----~------------~-------~--~----~ You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat -~----------~----~----~----~------~----~------~--~---
