The VEX 2.4ghz conversion is a simple affair.  I'm just about finished
with it and will be publishing a how-too article.  Besides the
frequency conversion I've replaced the right stick with a couple of
push-buttons and a three-position rocker switch.  All this effort to
convert a VEX may seem overkill but I had the radio on the shelf and
more importantly, it already had two channels setup on push-buttons.
When it's all done the system will have to analog controls (left
stick) and eight on-off controls, perfect for R/C warship combat which
is the intended application.

Steve Tyng




On Jan 31, 3:27 pm, SteveH <[email protected]> wrote:
> I bought a few of the Vex sets while they were on sale cheap. A 2.4
> GHz conversion would indeed be interesting, bit only if it's
> relatively simple; otherwise, one might as well pony up the cash for a
> Spektrum DX6. Any details on the work in progress?
>
> As for decoding the Vex receiver output, an option I have in mind (and
> parts on hand for) is the Atmel AVR microcontrollers; powerful, cheap,
> can be programmed in C, have Flash and EEPROM, and Gumstix sells a
> "Robostix" board for not too much $$ that has a row of R/C servo
> connectors. If anyone is seriously interested, I may be doing
> something in this regard with a Robostix this spring. If I get there,
> I'll share the code...
>
> On Jan 29, 11:32 am, Steve Tyng <[email protected]> wrote:
>
> > The conversion is still in progress.  What little has been done will
> > be on display.
>
> > Steve
>
> > On Jan 29, 10:53 am, Ron <[email protected]> wrote:
>
> > > I will be attending.
> > > The forecast up here (Annapolis area) is cold with 50% chance of snow,
> > > accumulating less than an inch. This per weather.com
>
> > > Steve: If you have finished your conversion of your Vex transmitter,
> > > could you throw it in your car/truck? I would like to see it.
>
> > > Ron
>
> > > > ------------------------------------------------------------------------
> > > > *From:* Steve Tyng <[email protected]>
> > > > *To:* R/C Tank Combat <[email protected]>
> > > > *Sent:* Thu, January 28, 2010 11:35:38 AM
> > > > *Subject:* [TANKS] Re: Tank Expo 2010
>
> > > > So who's going to the Tank Expo this Saturday?
>
> > > > Steve Tyng
>
> > > > On Jan 5, 9:26 pm, Frank Pittelli <[email protected]
> > > > <mailto:[email protected]>> wrote:
> > > > > After analysis of various calendars and extensive discussions with the
> > > > > technical giants in the field, the wildly popularTankExpo2010will be
> > > > > held at the Tri-Pact Research Facility in Annapolis, Maryland on
> > > > > Saturday, January 30,2010.  The festivities will commence at 10am EST
> > > > > with all the pomp and circumstance associated with the "Donut Opening
> > > > > Ceremony", followed by lots of technical discussions, lunch, more
> > > > > discussions, some demos, a snack, more talk and then finally the 
> > > > > closing
> > > > > ceremony.
>
> > > > > As in past years, theExpois open to anyone even remotely interested in
> > > > > R/CTankCombat, tanks, robotics, technical stuff or even just BS'ing.
> > > > > So, if you're in the area, please plan on attending, with or without
> > > > > something to show everyone.
>
> > > > > Members who can't attend in person will be able view live video using 
> > > > > a
> > > > > web browser and/or Skype to participate in a conference call/chat
> > > > > session.  Details will be posted a few days before theExpo.
>
> > > > >         Frank P.
>
> > > > > PS. If you need directions to the event, please send me a private 
> > > > > email.
>
> > > > --
> > > > You are currently subscribed to the "R/C Tank Combat" group.
> > > > To post a message, send email to [email protected]
> > > > <mailto:[email protected]>
> > > > To unsubscribe, send email to
> > > > [email protected]
> > > > <mailto:[email protected]>
> > > > Visit the group athttp://groups.google.com/group/rctankcombat
>
> > > > --
> > > > You are currently subscribed to the "R/C Tank Combat" group.
> > > > To post a message, send email to [email protected]
> > > > To unsubscribe, send email to [email protected]
> > > > Visit the group athttp://groups.google.com/group/rctankcombat
>
>

-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to [email protected]
To unsubscribe, send email to [email protected]
Visit the group at http://groups.google.com/group/rctankcombat

Reply via email to